PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Spare fuse |
Specified fuses: | EAU34240 |
Replacing a headlight bulb | |
Main fuse: |
|
20 A |
|
Ignition fuse: | 1 |
10 A | |
Signaling system fuse: |
|
15A Headlight fuse:
10A
Fuel injection system fuse:
10A
2. Remove the blown fuse, and then |
install a new fuse of the specified |
amperage. WARNING! Do not use |
a fuse of a higher amperage rat- |
6ing than recommended to avoid causing extensive damage to the electrical system and possibly a
fire.[EWA15131]
TIP
After removing and installing the main fuse, be sure to turn the main switch from “ON” to “OFF” three times in three- second intervals to initialize the idle speed control system.
3.Turn the key to “ON” and turn on the electrical circuit in question to check if the device operates.
4.If the fuse immediately blows again, have a Yamaha dealer check the electrical system.
1. Headlight
This model is equipped with quartz bulb headlights. If a headlight bulb burns out, have a Yamaha dealer replace it and, if necessary, adjust the headlight beam.