INSTRUMENT AND CONTROL FUNCTIONS

3

3

2

1

 

 

 

1.Fuel tank cap

2.Oil tank cap

3.Fuel tank cap lock lever

Fuel and 2-stroke engine oil tank caps

The fuel tank cap and the 2-stroke engine oil tank cap are located under the seat. (See page 3-8 for seat opening and closing procedures.)

Fuel tank cap

To remove the fuel tank cap

Lift the fuel tank cap lock lever and then turn it from the “LOCK” position to the “OPEN” position. The fuel tank cap can then be removed.

To install the fuel tank cap

Insert the fuel tank cap into the tank opening with the mark on the cap and fuel filler aligned. Turn the lever to the “LOCK” position, and then push it down.

EW000023

w

Make sure that the fuel tank cap is properly closed and locked before riding.

2-stroke engine oil tank cap

Remove the 2-stroke engine oil tank cap by turning it counterclockwise. Install the 2-stroke engine oil tank cap by turning it clockwise.

EW000025

w

Make sure that the fuel and 2-stroke engine oil tank caps are properly installed before riding the scooter.

1

2

1.Fuel tank filler tube

2.Fuel level

EAU03753

Fuel

Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown.

EW000130

w

Do not overfill the fuel tank, otherwise it may overflow when the fuel warms up and expands.

Avoid spilling fuel on the hot engine.

3-6