OPERATION AND IMPORTANT RIDING POINTS
ENGINE STOP
1 | 2 |
|
1.Start switch “,”
2.Kickstarter
EC000045
cC
If the oil level warning light does not
come on, have a Yamaha dealer check the electrical circuit.
3.Close the throttle completely.
4.Start the engine by pushing the start switch or by pushing the kickstarter lever down, while applying the front or rear brake.
NOTE:
If the engine fails to start by pushing the start switch, release the switch, wait a few seconds, and then try again. Each starting attempt should be as short as possible to preserve the battery. Do not crank the engine more than 5 seconds on any one attempt. If the engine does not start with the starter motor, try using the kickstarter.
ECA00055
cC
For maximum engine life, always warm the engine up before starting off. Never accelerate hard when the engine is cold!
BRAKE
Starting off | EAU00433 | |||
|
| 5 | ||
NOTE: |
|
| ||
|
|
|
| |
|
|
|
| |
|
|
|
| |
Before starting off, allow the engine to warm up.
1.While pulling the rear brake le- ver with your left hand and holding the grab bar with your right hand, push the scooter off the centerstand.
2.Sit astride the seat, and then adjust the rear view mirrors.
3.Switch the turn signal on.