EAU03434

SCOOTER CARE AND STORAGE

Care

While the open design of a scooter reveals the attractiveness of the tech- nology, it also makes it more vulner- able. Rust and corrosion can develop even if high-quality components are used. A rusty exhaust pipe may go unnoticed on a car, however, it detracts from the overall appearance of a scooter. Frequent and proper care does not only comply with the terms of the warranty, but it will also keep your scooter looking good, extend its life and optimize its perfor- mance.

7

Before cleaning

1.Cover the muffler outlet with a plastic bag after the engine has cooled down.

2.Make sure that all caps and cov- ers as well as all electrical cou- plers and connectors, including the spark plug cap, are tightly installed.

3.Remove extremely stubborn dirt, like oil burnt onto the crankcase, with a degreasing agent and a brush, but never apply such products onto seals, gaskets and wheel axles. Al- ways rinse the dirt and degreaser off with water.

Cleaning

ECA00011

cC

8 Avoid using strong acidic wheel cleaners, especially on spoked wheels. If such products are used on hard-to-remove dirt, do not leave the cleaner on the affected area any longer than instructed. Also, thoroughly rinse the area off with water, immediately dry it, and then apply a corrosion protection spray.

8Improper cleaning can damage windshields, cowlings, panels and other plastic parts. Use only a soft, clean cloth or sponge with mild detergent and water to clean plastic.

8Do not use any harsh chemical products on plastic parts. Be sure to avoid using cloths or sponges which have been in contact with strong or abrasive cleaning products, solvent or

7-1