Yard-Man 131704G StartingKi~L, Transmission~r~, L ! --Ig~, Unhook, Tapping, aelt./Keeper, Screws

5.Remove the four self-tapping screws which hold the belt keeper assembly to the frame at the engine pulley. Remove the belt keeper assembly.

6.Loosen both the front and rear idler pulleys. Remove the belt from around the idler pulleys.

7.Roll the belt off of top sheave of engine pulley, on- to the pulley hub.

8.Units with Cold Weather Starting Kits Installed: Remove the rear belt guard at the transmission pulley by removing two hex bolts, lock washers and hex nuts.

9.Remove belt from the transmission pulley, lifting the belt up over the fan on top of the pulley.

10.Remove belt from the engine pulley, and remove from the unit.

Reassemble using a new belt, following instructions in

reverse order.r -

aelt./Keeper

EnginePulley	, r
		Assembly
Self- TapPi ~g ,
		~If-	Tapping
Screws		/"	Screws

Unplug the electric PTO.6.

Remove the torque bracket by removing two hex bolts and washers. See figure 23.

7.Remove the belt keeper assembly by removing the four self-tapping screws which hold the belt keeper assembly to the frame at the engine pulley. See figure 23.

FIGURE 23.- 734G

8.	Loosen	the	idler	pulley. Remove the belt	from
	around	the	idler	pulley.
9.	Roll the	belt off of top sheave of engine pulley,			onto

Rear'

Idler

Pulley

Belt Guard --I (Cold Weather

Starting Kit) ..

1]

,J

Unhook

Spring

1=

	the pulley		hub.
10.	Units with		Cold Weather Starting	Kits Installed:
	Remove the rear belt guard at the transmission
	pulley by removing two hex bolts, lock washers and
	hex nuts.
11.	Remove	belt from the transmission		pulley, lifting
	the belt up over the fan on top of the pulley.
12.	Remove	belt from the engine pulley, and remove
	from the	unit.

Reassemble using a new belt, following instructions in reverse order.

Transmission==- y

Pulley

FIGURE 22.-Model 704F

MODEL 734G (See Figures 23 and 24)

1.Depress the clutch pedal and set parking brake.

2.Remove the deck from the lawn tractor.

3.Raise and block the front wheels of the lawn trac- tor so you can work under it.

4.Remove the transmission panel, and unhook the spring from the idler pulley.

~-Model5.15

Pulley~

(ColdBelt WeatherGua d'

StartingKi~L

::L ! --Ig~

Transmission~r~

Pulley

FIGURE 24.- Model 734G

"Unhook

Spring

-

y