Electric Starter Outlet (If so equipped)

Requires use of a three-prong outdoor extension cord (packed with the snow thrower) and a 120V power source/wall outlet.

Augers

When engaged, the augers rotate and draw snow into the housing.

Chute Assembly

Snow drawn into the auger housing is discharged out the chute assembly.

SECTION 4: OPERATING YOUR SNOW THROWER

Before Starting

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

Gas & Oil Fill-Up

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your snow thrower. Read instructions carefully.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

Starting The Engine

•Attach spark plug wire to spark plug. Make certain the metal loop on the end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug.

•Make certain both the auger control and drive control are in the disengaged (released) position.

•Move throttle control up to FAST position. Insert

ignition key into slot. Make sure it snaps into place. Do not attempt to turn the key.

NOTE: The engine cannot start unless the key is inserted into ignition switch.

Electric Starter (on models so quipped)

•Determine that your home’s wiring is a three-wire grounded system. Ask a licensed electrician if you are not certain.

CAUTION: If your home’s wiring system

is not a three-wire grounded system, do not use this electric starter under any conditions.

WARNING: The optional electric starter is equipped with a grounded three-wire power cord and plug, and is designed to operate on 120 volt AC household current. It must be used with a properly grounded three-prong receptacle at all times to avoid the possibility of electric shock. Follow all instructions carefully prior to operating the electric starter.

WARNING: If your home electrical

system is grounded, but a three-hole receptacle is not available, do not use your snow thrower’s electric starter.

If you have a grounded three-prong receptacle, proceed as follows:

•Plug the extension cord into the outlet located on the engine’s surface. Plug the other end of extension cord into a three-prong 120-volt, grounded, AC outlet in a well-ventilated area.

•Rotate choke control to FULL choke position (cold engine start).

NOTE: If the engine is already warm, place choke control in the OFF position instead of FULL.

•Push the primer two or three times for cold engine start, making sure to cover vent hole in the center of the primer when pushing.

NOTE: DO NOT use primer to restart a warm engine after a short shutdown.

•Push starter button to start engine.

•Once the engine starts, immediately release starter button.

•As the engine warms, slowly rotate the choke control to the OFF position. If the engine falters, quickly rotate the choke control back to FULL and then slowly into the OFF position again.

•When disconnecting the extension cord, always unplug the end at the three-prong wall outlet before unplugging the opposite end from the snow thrower.

Recoil Starter

•Rotate choke control to FULL choke position (cold engine start).

10

Page 9 Page 11
Page 10
Image 10
Yard-Man 600 manual Operating Your Snow Thrower
Page 9 Page 11

600 specifications

The Yard-Man 600 is an innovative lawn mower that has gained a strong reputation for its efficiency, durability, and user-friendly features. Designed for both residential and commercial use, this mower provides an exceptional mowing experience, effortlessly tackling various terrains and grass types.

One of the standout features of the Yard-Man 600 is its powerful engine. Equipped with a robust 160cc OHV engine, it delivers reliable performance and superior cutting power. This engine allows the mower to handle thicker grass and uneven terrains while ensuring a consistent cutting height. The mower's self-propelled capability further enhances its efficiency, allowing users to navigate their yards with minimal effort.

The Yard-Man 600 boasts a durable steel deck that measures 21 inches, providing ample cutting width for mowing larger lawns with fewer passes. The steel construction not only ensures longevity but also contributes to the mower's stability and resistance to wear and tear. Additionally, the mower features a 5-position height adjustment system, enabling users to customize cutting heights from 1 to 4 inches, catering to different lawn conditions and personal preferences.

Another notable technology incorporated into the Yard-Man 600 is its advanced mulching system. This feature allows grass clippings to be finely shredded and returned to the lawn, promoting healthier soil and reducing yard waste. The mower also offers the option for side discharge and rear bagging, providing versatility based on user preference and lawn care needs.

Comfort and ease of operation are key priorities for the Yard-Man 600. It features an ergonomically designed handle that can be adjusted to multiple heights, ensuring a comfortable grip for users of different sizes. The mower's lightweight construction also makes it easy to maneuver, reducing fatigue during extended use.

Safety is paramount, and the Yard-Man 600 includes several safety features. It features a blade brake that stops the blade within seconds when the user releases the handle, minimizing the risk of accidents. Additionally, the sturdy wheel design provides excellent traction, contributing to safer operation on inclines and wet surfaces.

In conclusion, the Yard-Man 600 is an exceptional lawn mower that combines power, durability, and user-friendliness. With its powerful engine, versatile cutting options, and emphasis on safety, it stands out as a reliable choice for anyone looking to maintain a immaculate lawn. Whether you're a homeowner or a landscape professional, the Yard-Man 600 is engineered to meet and exceed expectations.
Top Page Image Contents