Yard Machines 611 manual Contents of Hardware Pack

SECTION 2: CONTENTS OF HARDWARE PACK

Lay out the hardware according to the illustration below for identification purposes. Part numbers are shown in parentheses. (Hardware pack may contain extra items which are not used on your unit.)

A		(4)Lock Washers (C)
	(2)Hex Bolts (A)	(736-0119)
	(710-3180)

(2) Hex Bolts (B)	(2) Saddle (I)
710-3008
	(784-5599)

D

		(4) Self-Tapping
		Screws (F)
		(710-0599)
	(2) Hex
	Bolts (G)
(710-3015)		(2) Hex Lock Nuts (H)
		(712-3027)
G		(2) Hex Nuts (D)
		(712-3010)
	Cupped Washer (N)
(736-0242)
		Hairpin Clip (T)
		(714-0104)
	(2) Flat Washers (S)
(736-0185)

B	(4) Hex Nuts (D)
	(712-3010)

C

(4)Carriage Bolts (E) (710-0262)

(4) Lock

Washers (C)

(4) Hex Nuts (D)(736-0119)

(712-3010)

E

(2)“Z” Fitting (R) (746-0778)

(2) Hex Nuts (J)

(712-0121)

F

		(6) Hex Lock Nuts (M)
		(712-3027)
	(6) Hex Bolts (K)	(3) Chute Flange Keepers
	(710-3015)
		(Not Shown) (731-0851)
H		(2) Shear Bolts
	(2) Hex Lock Nuts	(710-0890A)
*
	(712-0429)

*The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a hard foreign object or an ice jam, the snow thrower is designed so that the bolts may shear. Two replacement shear bolts and nuts are provided for your convenience. Store in a safe place until needed.

5