Yard Machines MTD27P manual Maintenance Instructions

MAINTENANCE INSTRUCTIONS

6.Lock the ends of the line in opposite slots on the spool (Fig. 23). Place the clear plastic line retainer back over the line and spool (Fig. 24). Pull the lower line up into the lower slot in the clear plastic line retainer (Fig. 25). Pull the upper line down into the upper slot (Fig. 26).

7.Insert the line through each eyelet in the spool carrier and slide the spool into the carrier. (Fig. 27)

NOTE: Ensure that the line is within the clear plastic line retainer. If it's outside of the clear plastic line retainer, the line will not feed.

8.Make sure to insert the spring, assemble the spool and spool carrier back onto the trimmer. To do so, push the head on and turn it clockwise until it locks. (Fig. 28 and Fig. 29)

Fig. 23

Fig. 27

Fig. 24

Fig. 28

Fig. 25

Fig. 29

Fig. 26

12