Check the Tire Pressure, Checklist | Yazoo/Kees ZCBI48181 guide

ASSEMBLY

CHECK THE TIRE PRESSURE

Correct tire pressure is important for best cutting performance.

•Check the tire pressure and adjust accordingly. Refer to the “SPECIFICATIONS” section in this manual.

CHECKLIST

PLEASE REVIEW THE FOLLOWING

CHECKLIST

•All assembly instructions have been completed

•No remaining loose parts in crate

•Seat is adjusted properly and securely fastened

•All tires are properly inflated

•Check wiring. See that all connections are still secure, and wires are properly clamped.

•Before driving the mower, be sure the IZT(Integraded Zeroturn Transaxle) bypass linkages are in the drive position.

WHILE LEARNING HOW TO USE YOUR MOWER, PAY EXTRA ATTENTION TO THE FOLLOWING ITEMS:

•Engine oil is at proper level

•Fuel tank is filled with fresh, clean, regular unleaded gasoline. Check your engine manual for fuel requirements.

•Become familiar with all controls – their location and function. Operate them before you start the engine.

•Become familiar with unit operation on a flat and level area with the mower deck shut off.

•Be sure the brake system is in a safe operating condition. If adjustment is needed see Service and Adjustment section.

14

Image 14

Yazoo/Kees ZCBI48181 manual Check the Tire Pressure, Checklist

Contents

Operators Manual Models ZCBI48181 Good Service Contents Symbols and Decals General Use Safety InstructionsSafety Instructions Personal protective equipment Driving on Slopes Do as follows Children 8011-563 Transport Important Information Specifications Customer Responsibilities To Remove the Mower from Crate AssemblyTools Required For Assembly Before Removing Mower from the Skid On position Checklist Check the Tire Pressure IZT Integraded Zeroturn TransaxleBYPASS Linkages OperationControls Engine HOW to USE Your MowerDeck Blades To Adjust the Deck Cutting Height See Fig To Operate Mower To Adjust ANTI-SCALPRollers See Figure To Operate on Hills To Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD Gasoline Mowing Tips Before Each USE Maintenance ScheduleGeneral Recommendations Blade Care Lubrication ChartOperator Presence System Tires Battery To Sharpen Blade See Fig Belts Clean AIR ScreenClean AIR INTAKE/COOLING Areas Engine Engine OIL Filter CleaningAIR Filter Spark Plugs Mower Service and AdjustmentBefore Performing ANY Service or Adjustments To Level Deck FRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck Belt To Replace IZT Integraded Zeroturn Transaxle Belt See Fig To Start AN Engine with a Weak Battery To Adjust the Seat See FigTo Adjust Control Levers See Fig To Remove Wheels for Repair Replacing Battery See Fig To Attach Jumper Cables To Adjust Park Brake Tracking Adjustment Fuel System BatteryStorage Engine OIL Other Cylinders Troubleshooting Points Problem Cause Correction Problemcausecorrection Attachment Poor cut uneven Wiring Schematic Page