OPERATION |
| |
CONTROLS |
| |
3 | 3 | |
1 |
| |
5 |
| |
7 | 8 | |
9 | ||
| ||
10 |
| |
| ||
4 | 2 | |
| ||
6 | ||
|
FIGURE 3
1.PTO SWITCH – Used to engage or disengage the deck blades.
2.FOOT PEDAL – Used to raise, lower and select various cutting heights of the deck.
3.CONTROL LEVERS – Sets the speed of the mower in both forward and reverse directions and turns the mower.
4.CHOKE CONTROL – Used when starting a cold engine.
5.THROTTLE CONTROL – Used to control Engine Speed.
6.IZT (Integraded Zeroturn Transaxle)BYPASS LINKAGES –
Bypasses IZT’s for pushing or pulling mower.
7.IGNITION SWITCH – Used to start or stop the engine.
8.PARKING BRAKE LEVER – Engages and disengages the park brakes.
9.TENSION RELIEF LEVER – Used to release the belt tension on the deck belt for ease in removing or replacing the belt.
10.HOUR METER – Indicates hours of operation.
15
