MAINTENANCE
Cleaning and Washing
Regular cleaning and washing, especially under the mower deck, will increase the machine’s lifespan. Make it a habit to clean the machine directly after each use (after it is cooled), before the dirt sticks.
Avoid using a high pressure washer or steam cleaner. Rinse at normal water pressure. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. Regularly clean deck and underside of deck, avoid spraying engine and electrical components with water.
Check before rinsing that the fuel tank lid is tight to avoid getting water in the tank.
Use protective glasses when cleaning and washing.
Cleaning |
Caster Wheels
Check every 200 hours. Check that wheels rotate freely. If wheels do not rotate freely take the unit to your dealer for service.
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam fill material to the tires. Excessive loads created by foam filled tires will cause premature failures.
Only use O.E.M. specified tires.
1 |
3 |
2 |
Foam filled tires or solid tires will void the warranty.
Removal and installation of caster wheel
1.Nut
2.Bolt
3.Sleeve
1. Remove nut and caster bolt. | Caster wheels |
|
2.Pull the wheel out of the fork and take care of the sleeve.
3.Install in reverse order. Tighten caster bolt.
Hardware
Check daily. Inspect the entire machine for loose or missing hardware.
