Yazoo/Kees ZHDD61271, ZHDD72341 Controls, Gauges, Throttle Control, Ignition, Hour Meter, Console

CONTROLS

Gauges

Water temperature gauge- indicates coolant temperature and warns of overheat situation.

Ammeter - indicates amount of electrical flow at the battery. Under normal operating conditions the needle will be slightly on the plus (+) side of the gauge, showing that current is being supplied to the battery. At idle speed, the indicator may be at zero or on the negative (-) side. A continuous negative reading at normal operating speed indicates a malfunction in the charging system that should be checked immediately.

Oil pressure meter - tells what the pressure is in the oil system and warns if pressure is too low for operation.

AMMETER

WATER TEMPERATURE

Gauges

OIL PRESSURE

BAM-2

Throttle Control

The throttle control regulates the engine speed.

In order to increase or decrease the engine speed, the control is moved forward or backward respectively.

Avoid idling the engine for long periods. Use full throttle when mowing.

Ignition

THROTTLE CONTROL

The ignition key is placed in the front console and is used to start the machine.

IMPORTANT INFORMATION

Wait till the glow plug light goes out before turning the engine over. To prolong starter life use short starting cycles, DO NOT exceed 30 secs./min.

Throttle control

HOUR METER

BAM-2

GLOW PLUG LIGHT

Hour Meter

The hour meter displays the total operating time and reminds of service intervals.

Meter will indicate “CHG OIL” for engine oil and MAINTENANCE CHECK for general service.

Service alerts will re-set after serveral hours.

Console

IGNITION

CONSOLE

19