INSTALLATION INSTRUCTIONS
Typical Top Flue Installation
To chimney connection as 
detailed in building regulations
Typical Rear Flue Installation
To chimney connection as detailed in building regulations
600mm minimum
1000mm maximum unsupportable weight
135 Elbow
Size | Stovax Part No. |
5" | 4512 |
|
|
6" | 4612 |
|
|
Flue Pipe 915mm (3ft)
Size | Stovax Part No. |
5" | 4502 |
6" | 4602 |
600mm minimum
1000mm maximum unsupportable weight
| Elbow |
Size | Stovax Part No. |
|
|
5" | 4512 |
|
|
6" | 4612 |
|
|
Flue Pipe 915mm (3ft)
Size | Stovax Part No. |
|
|
5" | 4502 |
|
|
6" | 4602 |
|
|
PR7515
1.3Rear flue installation
Self Tapping Screw
| Tee |
Size | Stovax Part No. |
5" | 4516 |
6" | 4616 |
Cap
Seal Collar with Fire Cement
PR7512
• Insert a tee into the flue collar
The cap supplied with the tee is used as cleaning access.
• Lift appliance into position
Take care not to damage the hearth finish.
•Level feet using adjustable bolts
•Connect tee to the chimney using flue pipe
•Secure tee to the flue collar with self tapping screw
•Seal the connecting joints with fire cement
Do not use a 90˚ elbow to make this connection
The Flue must be installed in accordance with manufacturers instructions.
PR7513
2.REMOVAL OF THE LOG GUARD
2.1To remove the Log guard:
•Lift Log Guard clear of the supporting brackets
•Rotate to clear the sides of the door opening.
PR7537
Do not use appliance without the log guard in position.
3.FITTING & Removal of THE BAFFLE
3.1The appliance is fitted with a baffle in the top of the firebox to maintain efficient combustion.
•Allow the appliance to cool fully before removing the baffle system.
•Remove the Log Guard from the appliance to give access to the firebox
21
