INSTALLATION INSTRUCTIONS
Baffle Extension
Tubes
Support Pin
Rear Lip
PR7525
3.2The front lip of the baffle should point downwards.
•Lift the baffle and slide the two baffle extension tubes off of the support pins on the sides of the firebox.
The baffle can now be lifted clear of the support pins and rotated out through the front of the appliance
4.FITTING AND REMOVAL OF THE FIREBRICKS
4.1Remove the firebricks as part of the routine maintenance. This can be carried out without the use of tools after removing the log bar, drop in front and baffle.
4.2Allow the appliance to cool fully before removing firebricks.
4.3Take care when handling, as bricks can become fragile after use. Life span depends on the type of fuels burnt and the level of use.
•Replace damaged bricks as soon as possible from your dealer
4.4To remove bricks:
•Remove the upper side bricks by sliding out from above the grate supports
Wood versions have two lower side bricks. Remove in the same manner as the upper bricks, below the grate supports.
Note: Chamfers are positioned against the appliance body
• Replace in reverse order
Upper Side
Log Guard
Front Lip
Bricks
Upper Side
Bricks
PR7526
3.3Do not modify the baffle
3.4Fitting is the reverse of the above
IMPORTANT: Ensure the Baffle Extension Tubes are fitted correctly before using the appliance.
Lower bricks in |
|
wood stove only | PR7527 |
|
5.FITTING & Removal of the riddling mechanism
Exmoor M/F Kit -
Exe M/F Kit-
Devon M/F Kit-
County M/F Kit-
5.1The optional
•Remove the log guard if fitted
•Remove the drop in front plate
22