![ACCESSORIES](/images/new-backgrounds/35198/3519813x1.webp)
ACCESSORIES
Refer to Price Manual for specific model numbers. Start Assist Kit (2SA067*)
Blower Time Delay - Available to increase efficiency when installed. Installs on indoor section and maintains blower for approximately one minute after cooling thermostat has been satisfied.
Hard Start Kits - Provides required starting torque for use with Thermal Expansion Valve Kit.
Low Temperature Cutout (2LT06700224) - Prevents heat pump operation below
Compressor Blanket - Designed to further reduce the nor- mal operating sound.
Thermal Expansion Valve Kit - 1TVM700 Series TXV kit used to improve system performance.
Outdoor Thermostat (2TD06700124) - Provides additional staging of supplemental electric heat.
Room Thermostats - A wide selection of matching thermo- stats is available to provide features required for any installa- tion.
2H/1C, manual changeover electronic
3H/2C,
3H/2C, auto/manual changeover, electronic programmable,
*For the most current accessory information, refer to the price book or consult factroy.
SOUND POWER RATINGS*
UNIT | (dBA) | |
MODEL | ||
| ||
018 | 80 | |
024 | 80 | |
030 | 80 | |
036 | 82 | |
042 | 82 | |
048 | 77 | |
060 | 82 |
* Rated in accordance with ARI
TYPICAL INSTALLATION
| MINIMUM 24” SERVICE ACCESS | THERMOSTAT | TO FURNACE OR | |
60” OVERHEAD | CLEARANCE ON ONE SIDE | |||
| ||||
| AIR HANDLER | |||
CLEARANCE | WEATHERPROOF |
| ||
| TERMINAL BLOCK | |||
| DISCONNECT |
| ||
|
|
| ||
| SWITCH |
| NEC CLASS 1 WIRING | |
|
|
| NEC CLASS 2 WIRING | |
10” CLEARANCE |
|
| TO INDOOR COIL | |
COIL AREA |
|
|
NOTE: ALL OUTDOOR WIRING MUST BE WEATHERPROOF.
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
CONTROL ACCESS PANEL
Unitary Products Group | 7 |