York F*FP, F*FV Accessories, Limitations, Extended Airflow DATA1 for 230 Volt Heat Pump Models

ACCESSORIES

Refer to Price Manual for specific model numbers.

VERTICAL SUSPENSION KIT - The suspension kit is designed to be used with all sizes of fan coil units whenever the application requires vertical suspension of the unit.

ELECTRIC HEATERS - Models shown under Electrical Data include sequencers and temperature dual limit switches for safe, efficient operation. Circuit breakers are provided where shown.

BOLT-ON THERMAL EXPANSION VALVE - TXV kits are available for enhanced efficiency. These fan coil units have factory installed TXV’s.

295421-YTG-B-0707

LIMITATIONS

These units must be wired and installed in accordance with all national and local safety codes. Voltage limits are as fol- lows:

Normal Operating voltage Range1 187-253

1. Utilization range “A” in accordance with ARI Std. 110.

Air flow must be within the minimum and maximum limits approved for electric heat, evaporator coils and outdoor units:

Entering Air Temperature Limits

Wet Bulb Temp. ºF		Dry Bulb Temp. ºF
Min.	Max.	Min.	Max.
57	72	65	95

EXTENDED AIRFLOW DATA1 FOR 230 VOLT - HEAT PUMP MODELS

	Blower Motor					230 Volt
Models					CFM @ External Static Pressure - IWC
	Speed
		0.10	0.20	0.30	0.40	0.50	0.60	0.70	0.80	0.90	1.00
	High	950	910	865	835	775	730	662	590	502	400
F4FP024H06T2*	Med	845	815	785	745	705	654	594	524	439	344
	Low	650	630	605	575	540	508	450	383	285	158
	High	1,270	1,210	1,150	1,085	1,015	946	862	769	645	502
F4FP030H06T2*	Med	1,050	1,040	995	930	855	804	714	624	494	364
	Low	855	820	780	735	680	624	550	447	333	190
	High	-	1,310	1,250	1,175	1,120	1,053	983	894	779	645
F4FP036H06T2*	Med	1,200	1,150	1,100	1,040	985	933	879	795	711	587
	Low	1,060	1,015	970	925	860	809	740	661	572	453
	High	1,270	1,210	1,150	1,085	1,015	946	802	769	645	502
F4FP040H06T2*	Med	1,050	1,040	995	930	855	804	714	624	494	364
	Low	855	820	780	735	680	624	550	447	333	190
	High	-	1,575	1,500	1,420	1,350	1,273	1,192	1,102	996	871
F4FP042H06T2*	Med	1,460	1,395	1,330	1,260	1,190	1,125	1,052	960	842	695
	Low	1,250	1,200	1,155	1,100	1,050	1,001	931	851	751	631
	High	1,575	1,535	1,475	1,390	1,310	1,245	1,147	1,030	897	735
F4FP045H06T2*	Med High	1,375	1,315	1,255	1,185	1,110	1,040	944	848	732	606
	Med Low	1,210	1,160	1,110	1,050	980	921	844	737	640	533
	Low	1,035	990	940	890	825	770	698	616	524	432
	High	2223	2158	2090	2029	1929	1861	1788	1679	1594	1501
	Med High	1948	1904	1801	1815	1777	1741	1681	1618	1539	1453
F5FP048H06T2*	Med	1741	1690	1649	1606	1564	1516	1476	1436	1387	1353
	Med Low	1499	1454	1415	1370	1328	1269	1228	1191	1132	1093
	Low	1286	1233	1177	1142	1092	1039	987	960	888	842
	High	2195	2145	2070	2008	1920	1852	1754	1663	1570	1462
	Med High	1938	1899	1873	1824	1791	1724	1679	1603	1521	1420
F5FP060H06T2*	Med	1726	1681	1641	1607	1560	1517	1485	1433	1402	1349
	Med Low	1525	1483	1441	1383	1356	1291	1253	1208	1169	1123
	Low	1306	1254	1204	1160	1114	1061	1008	980	914	876
	High	2,285	2,195	2,105	2,015	1,950	1,845	1,770	1,685	1,590	1,485
F4FV060H06T2*	Med.	2,125	2,020	1,910	1,805	1,705	1,597	1,491	1,386	1,280	1,175
	Low	1,655	1,605	1,550	1,500	1,450	1,398	1,326	1,245	1,153	1,052

NOTE: Air flow data shown above 0.50” W.C. external static pressure is for REFERENCE ONLY. Maximum allowable external static when electric heat is used is limited to 0.50” W.C. Maximum allowable external static pressure may also be limited by minimum CFM requirements for proper Heat Pump operation.

1. Includes Return Air Filter and Largest Electric Heater.

All F*FP series air handler units are UL Listed up to 0.50" w.c. external static pressure, including air filter, wet coil, and largest KW size heater.

4 Unitary Products Group