This product must be installed in strict compliance with the installation instructions and any applicable local, state and national codes including, but not limited to building, electrical, and mechanical codes.
Before performing service or maintenance operations on unit, turn off main power switch to unit. Electrical shock could cause personal injury. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer or service agency.
This system uses
Due to system pressure, moving parts, and electrical components, installation and servicing of air conditioning equipment can be hazardous. Only qualified, trained service personnel should install, repair, or service this equipment. Untrained personnel can perform basic maintenance functions of cleaning coils and filters and replacing filters.
Observe all precautions in the literature, labels, and tags accompanying the equipment whenever working on air conditioning equipment. Be sure to follow all other applicable safety precautions and codes including.
Nomenclature
Wear safety glasses and work gloves. Use quenching cloth and have a fire extinguisher available during brazing operations.
Inspection
As soon as a unit is received, it should be inspected for possible damage during transit. If damage is evident, the extent of the damage should be noted on the carrier’s freight bill. A separate request for inspection by the carrier’s agent should be made in writing.
Reference
Additional information is available in the following reference forms:
•Technical Guide -
•General Installation -
•Electric Heat Accessory -
Renewal Parts
Contact your local York® parts distribution center for authorized replacement parts.
This product must be installed in strict compliance with the enclosed installation instructions and any applicable local, state, and national codes including, but not limited to, building, electrical, and mechanical codes.
Improper installation may create a condition where the operation of the product could cause personal injury or property damage.
This system uses
D 1
EX
024 A 06
Product Category
D = Single Package Air Conditioner
(Air Cooled)
Product Generation
1 = New or Current Design
Product Identifier
EX =
EY =
Voltage Code
06 =
25 =
46 =
Factory Installed Electric Heat
A = No Electric Heat Installed
Nominal Cooling Capacity (MBH)
024 = 24,000 BTUH | 042 = 42,000 BTUH |
030 = 30,000 BTUH | 048 = 48,000 BTUH |
036 = 36,000 BTUH | 060 = 60,000 BTUH |
2 | Unitary Products Group |