Problem
Spinning starts late or the machine does not spin:
Possible cause/Solution
The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme.
•Redistribute the laundry. The load is too small.
•Add more items, redistribute the load manually and then select the spinning programme.
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
Mod |
Prod. No |
Ser. No |
Technical data
Dimensions
Electrical connection Voltage - Overall power - Fuse
Water supply pressure
Maximum Load
Spin Speed
Width | 60 cm |
Height | 85 cm |
Depth | 60 cm |
Depth (Overall dimensions) | 63 cm |
|
|
Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door.
Minimum | 0,05 MPa |
Maximum | 0,8 MPa |
Cotton | 5,5 kg |
Maximum | 1400 rpm |
|
|
Consumption values
Programme
White Cottons 90°
Cottons 60°
Cottons + ECONOMY 60°
1)
Energy consumption
(KWh)
1.9
1.2
0.93
Water consumption (litres) |
| Programme duration (Mi- |
|
| nutes) |
58 | 130 | |
54 | 120 | |
|
|
|
49 |
| 140 |
|
|
|
15