Grease Filter (Fig. 12 - Page 3)
To prevent a
To clean the grease filter
When the oven has cooled down, remove the filter by pushing the protruding tongue on the filter upward, and wash carefully.
The grease filter should be cleaned after every use. The filter may be washed in a dishwasher on a 65°C wash. If the filter is heavily soiled, place the filter in a saucepan of waterwithapproximately1teaspoonofautomaticwashing powder or dishwasher powder. Bring to the boil and leave to soak for approximately 30 minutes or longer depending on the degree of soiling. Ensure the solution does not boil over as it could mark your hob.
Rinse filter in clear water and dry.
Remember to refit the filter before using the oven again.
Replacing the Oven Light (Fig.13 - Page 4)
If the oven bulb needs replacing, it must comply with the following specifications:
-Electric power: 25W,
-Electric rate:
-Resistant to temperatures of 300°C,
-Connection type: E14.
These bulbs are available from your local Zanussi Force Service Centre.
To replace the faulty bulb:
1.Ensure the oven is isolated from the electrical supply.
2.Turn the glass cover anticlockwise.
3.Remove the faulty bulb and replace with the new one.
4.Refit the glass cover.
5.Restore the electrical supply.
Cleaning the hinged grill (Fig.10 - Page 3)
This model has been fitted with a hinged grill element to enable you to clean the roof of the oven easily.
Before proceeding ensure the oven is cool and is isolated from the electricity supply.
1)Undo the screws which holds the grill in place (Fig.10 - Page 3). When doing this operation for the first time, we recommend using a screwdriver.
2)Then gently pull the grill downward to allow access to the oven roof.
3)Clean the oven roof with a suitable cleaner and wipe dry before replacing the hinged grill element.
4)Gently push up the grill element into place and firmly screw into place the holding nuts.
Ensure the grill holding nuts are firmly in place to avoid the grill falling down when in use.
Oven Shelves
To clean the oven shelves, soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy cleaning (see diagram). Please, ensure the retaining nuts are secure when refitting the shelf support.
Oven Cavity
The enamelled oven cavity is best cleaned whilst the oven is still warm.
Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
If the soilage has become set, after the oven has cooled down, the following process will help to soften the splatters to help make cleaning easier.
1.Place the grill/ meat pan on the oven shelf positioned in the lowest runner.
2.Add a few drops of
3.Closetheovendoor,turntheovenfunctionknobonfan oven 
and set the thermostat knob on 50°C.
4.After 15 minutes, turn off the thermostat and allow the fan oven to continue without heat for a further 5 minutes, when the temperature of the water will have cooled down.
5.Carefully remove the pan of water from the oven and use normal oven cleaners to clean away soil residues.
6.Leave a little of the soapy water to soak into any burned on spillage on the floor of the oven for a longer time if necessary.
15
