The control panel
Indicator and control lamps
Indicator lamps delayed start
On/Off button | Water softener | Delay start |
| button | button |
Control lamp | Functions | Programme |
| button | buttons |
Water softener and functions button:
In addition to selecting a programme you can press these two buttons to adjust the setting of the water softener.
Indicator lamps:
Shows • Current phase of the selected programme.
• Wash cycle in progress | top lamp |
• Drying in progress | middle lamp |
• Programme cycle | lowest lamp |
ended |
|
Control lamps:
Shows that • On/Off button is pushed in
•Refilling of salt container is necessary
•Refilling of the rinse aid dispenser
is necessary
How to set the delayed start
The programme start can be delayed by 3, 6 or 9 hours.
1. Press in the On/Off button.
2.Press the delay start button repeatedly, until the lamp next to the required hours of delay is lit.
3.Press the button for the required programme.
4.After the set delayed start time has elapsed, the programme starts.
Reset the delayed start:
If the programme has not started, you can change the set time with the delayed start button.
Cancelling the delayed start:
If the programme has not started, the delayed start can be cancelled. Press the delay start button repeat- edly, until none of the lamps next to the hours are lit. The required programme starts immediately.
- 6 -
