Zanussi DE 4744 manual Internal cleaning, Cleaning the filters, Dishwasher Cleaner, and remove

Maintenance and cleaning

Internal cleaning

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of			Finish Dishwasher
Cleaner	every 3 months or run a 65°C wash without
dishes using detergent. Regular use of			Finish
Dishwasher Cleaner		cleans inaccessible parts,
eliminates unpleasant food odours and helps
prevent the build-up of limescale.

Cleaning the filters

The filters in the base of the washing compartment

are to a large extent self-cleaning. Nevertheless the filters should be checked and cleaned from time to time. Dirty filters will degrade the washing result.

1.Open the door, remove the lower basket.

2.The dishwasher filter system comprises a coarse/fine filter, microfilter and a flat filter. Unlock the filter system using a handle on the microfilter, and remove.

3. Turn the handle about	1	/ a turn anticlockwise
		4

and remove.

4.Take hold of the coarse/fine filter (1/2) by the handle with the hole and remove from the microfilter (3).

5.Clean all filters thoroughly under running water.

6.Remove the flat filter (4) from the base of the washing compartment and clean both faces thoroughly.

7.Put the flat filter back in the base of the washing compartment.

8.Place the coarse/fine filter in the microfilter and press together.

9.Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment.

The dishwasher must not be used without filters.

Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine.

MA15

MA17
MA16	4

18