Zanussi DE 4744 manual Fitting under a counter, Levelling, kitchen worktop or sink, 570-600

Models: DE 4744

1 28
Download 28 pages 16.26 Kb
Page 26
Image 26
Fitting under a counter

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two front retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Levelling

570-600

820

450

IN04

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

IN06

IN07

26

Page 26
Image 26
Zanussi DE 4744 manual Fitting under a counter, Levelling, kitchen worktop or sink, 570-600, Proceed as follows