The Control Panel
L O W | BUZZER | START |
TEMP | O F F |
|
| COTTON LINEN |
| SYNTHETICS |
|
EXTRA DRY | STORE DRY | IRON DRY | STORE DRY |
|
A | B | C | D |
|
| IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE | A U T O R E V E R S E | ||
DRYING
COOL TUMBLING
END OF PROGRAMME CLEAN FILTER NOW
T D S 4 8 3 E W
1 | 2 | 3 | 4 567 | 8 | 9 | 10 |
1 Programme Chart
This will help you to select the correct programme for drying.
2 Low Temperature Button 
Press this button to reduce the temperature when drying particularly delicate items.
To be used when drying synthetics with timed programme.
3 Buzzer Off Button 
During the
4 Start Button 
Press this button to start the selected drying programme.
If the door is opened during drying programme, this button has to be depressed after closing the door to
5 Drying Light 
This light indicates that the machine is performing the drying phase.
6 Cool Tumbling Light 
This light will illuminate when the cooling phase is in operation. This starts 9 minutes before the end of drying to prevent any creasing or crumpling of fabrics.
7 End of programme & Clean Filter Light 
This light comes on at the end of the drying programme and remains alight until the door is opened or the selector dial is turned to “0”.
The filter must be cleaned at the end of each drying cycle.
8 Door Ajar Light 
This light flashes when the door is open, or not closed properly.
9 Mains-On Light
This lights up by selecting the drying programme and goes out when the programme selector dial is turned to “0”.
10 Programme Selector Dial
To set the machine to the selected programme or time, turn the dial until the letter or the time you want coincides exactly with the pointer.
6
