Zanussi WIJ1075 manual Building-in, Electrical connection

Electrical connection

Before connecting the machine check that the mains voltage corresponds to the voltage given in the technical specifications.

Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use.

Connect the machine to an earthed socket, in accordance with current wiring regulations.

The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution.

Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre.

Important!

When the appliance is installed the power supply cable must be easily accessible.

Building-in

This appliance has been designed to be built into the kitchen furniture.

The recess should have the dimensions shown in picture A.

			600
			.
	515	596	min
			600
			min
	176,5
818	416	120	820
		541	195
		8
		160
	165	90
		490	A
P0965

Preparation and assembly of the door

The machine is originally pre-arranged for the assembly of a door opening from right to left. In this case it is sufficient to screw in the hinges

(1)and the counter-magnet (6) provided with the appliance, at the right level (Fig. B).

6			4
1	2	7	5
1
		3
23			B
P0982

76