The door will not open:

The programme is still running.

 

 

The door lock has not been released.

 

 

A programme which stops with water in drum

 

 

has been selected.

 

 

Spinning starts late or the

The electronic unbalance detection device

 

machine does not spin:

has cut in because the laundry is not evenly

 

 

distributed in the drum. The laundry is

 

 

redistributed by reverse rotation of the drum.

 

 

This may happen several times before the

 

 

unbalance disappears and normal spinning

 

 

can resume. If, after 10 minutes, the laundry

 

 

is still not evenly distributed in the drum, the

 

 

machine will not spin. In this case,

 

 

redistribute the load manually and reselect

 

 

the spin programme.

 

 

The machine makes an unusual

The machine is fitted with a commutator

 

noise:

motor which makes an unusual noise

 

 

compared with other traditional machines.

 

 

This motor enables a softer start to the spin

 

 

and controls the increase in spin speed

 

 

better. In this way, machine performance is

 

 

improved.

 

 

Water is not visible in the

The machine, which is the result of modern

 

machine:

technology, runs in a very economical way

 

 

with low water consumption. Performance is

 

 

nevertheless excellent.

 

 

 

The machine does not dry:

The drying time has not been selected.

 

 

The tap is closed.

 

 

The drain filter is blocked.

 

 

A suitable drying time in the correct sector

 

 

has not been selected.

 

 

The drum is overloaded.

 

 

 

If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

 

Mod

 

Prod. No

P0042

Ser. No

 

90

Page 22
Image 22
Zanussi WIJ1075 manual Door will not open, Spinning starts late or, Machine does not spin, Machine makes an unusual, Noise