Zanussi ZBF3124A user manual Install the appliance in the niche, Adjust the appliance in the niche

2	I
	4mm

1 44mm

I

Install the appliance in the niche.

Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the appliance and the cup- board front-edge is 44 mm. Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge. Make sure that the clear- ance between the appliance and the cupboard is 4 mm.

Adjust the appliance in the niche.

The lower hinge cover (in the accessories bag) makes sure that the distance be- tween the appliance and the kitchen furniture is correct. Open the door. Put the low- er hinge cover in position.

Attach the appliance to the niche with 4 screws.

Push the sealing strip be- tween the appliance and the adjacent cabinet.

Ha

D C

E

	Hc
E	Hd

Hb	ca. 50 mm
	90°
	21 mm

90°

ca. 50 mm

21 mm

Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case.

Attach the covers (C, D) to	Disconnect the parts (Ha),	Install the part (Ha) on the
the lugs and the hinge	(Hb), (Hc) and (Hd).	inner side of the kitchen
holes.		furniture.
Attach the hinge covers (E)
to the hinge.

10