Zanussi ZBF3124A Technical data, Closing the door, too low, too high, There is too much frost

Problem	Possible cause
	The product temperature is too high.
	The room temperature is too high.
	The Fast Freeze function is switched
	on.
The temperature in the freezer is	The temperature regulator is not set
too low.	correctly.
	TheFast Freeze function is switched
	on.
The temperature in the freezer is	The temperature regulator is not set
too high.	correctly.
	The door is not closed correctly.
	The product temperature is too high.
	Many products are stored at the same
	time.
	Products are too near to each other.
There is too much frost.	Food is not wrapped correctly.
	The door is not closed correctly.
	The temperature regulator is not set
	correctly.

Solution

Let the product temperature decrease to room temperature before storage.

Decrease the room temperature.

Refer to "Fast Freeze function".

Set a higher temperature.

Refer to" Fast Freeze function".

Set a lower temperature.

Refer to "Closing the door".

Let the product temperature decrease to room temperature before storage.

Store less products at the same time.

Store products so that there is cold air circulation.

Wrap the food correctly.

Refer to "Closing the door".

Set a higher temperature.

Closing the door

1.Clean the door gaskets.

2.If necessary, adjust the door. Refer to "Installation".

Technical data

3.If necessary, replace the defective door gaskets. Con- tact the Service Center.

Dimension of the recess Height

Width

Depth

Rising Time

The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.

8

880mm

560mm

550mm

20h