Control Panel
Cooking Function Display Temperature Time display display
}
1 | 2 | 3 |
Push Buttons
1.ON / OFF
2.Oven Function Control
3.Fast Heat Up / Defrost Function
4.Temperature Control / Current Temperature
5.Decreasing Control (Time or Temperature)
6.Increasing Control (Time or Temperature)
7.Minute Minder
8.Cooking Time
9.End of Cooking Time
"On/Off" Push Button
The oven must be switched on before setting any cooking function or programme. When button 
is pressed, the pilot light above will come on, and the oven light will switch on.
To switch off the oven, you can press button 
at any time. Any cooking function or programme will stop, the oven light will switch off and the time display will show the time of day only.
When button 
is pressed, the display will show the current internal temperature if the oven has not completely cooled down.
4 | 5 | 6 | 7 | 8 | 9 |
|
|
|
| } | |
|
|
| Programming | ||
Controls
All the oven functions are controlled by an electronic programmer.
You can select any combination of cooking function, cooking temperature and automatic timing.
In the event of a power failure, the programmer will keep all the settings (time of day, program setting or program in operation) for about 3 minutes. If power is not restored within 3 minutes, all the settings will be cancelled. When the power is restored, the numbers on the display will flash, and the clock/timer has to be reset.
Oven Function Control Push Button
Push button 
allows you to select the cooking function.
Each time you push this button, a pilot light will come on in the Oven Function Display, showing which cooking function has been chosen.
Increase and Decrease Push Buttons
Push buttons and 
allow you to increase or decrease temperature or time settings.
4
