Zanussi ZBM 972 manual Cleaning the hinged grill, Replacing the Oven Light

Replacing the Oven Light

If the oven bulb needs replacing, it must comply with the following specifications:

-Electric power: 15W,

-Electric rate: 230-240 V (50 Hz),

-Resistant to temperatures of 300°C,

-Connection type: E14.

These bulbs are available from your local Zanussi Force Service Centre.

ΦTo replace the faulty bulb:

1.Ensure the oven is isolated from the electrical supply.

2.Turn the glass cover anticlockwise.

3.Remove the faulty bulb and replace with the new one.

4.Refit the glass cover.

5.Restore the electrical supply.

FO 0287

Cleaning the hinged grill

This model has been fitted with a hinged grill element to enable you to clean the roof of the oven easily.

Before proceeding ensure the oven is cool and is isolated from the electricity supply.

Φ1) Undo the screw which holds the grill in place (see diagram).

2)Then gently pull the grill downward to allow access to the oven roof (see diagram).

3)Clean the oven roof with a suitable cleaner and wipe dry before replacing the hinged grill element.

4)Gently push up the grill element into place and firmly screw into place the holding nut.

Ensure the grill holding nut is firmly in place to avoid the grill falling down when in use

FO 0781

FO 0778

17