To select a cooking function
1.Switch on the oven by pressing the "On/Off" button.
2.Press the "Cooking Functions" button to select
the required oven function. Each time button is pressed, a different cooking symbol appears in the lower section of the display and the description of the cooking function appears as a message in the upper section. The
3.Symbol " " flashing means that it is possible to adjust the
4.When 5 seconds elapse, symbol " " will disappear showing that the temperature level has been stored in the Electronic Control memory. The thermometer
symbol rises slowly |
| , indicating the degree to |
|
which the oven is currently heated.
5.When the required temperature is reached, an acoustic alarm will sound for a short time and the thermometer symbol will light permanently.
To set the temperature and time
Button “ “ and ““ are used to adjust both the temperature and the time settings. Details about using them according to the different functions of the Oven Electronic Control are given in the following chapters.
As a general rule, please note that:
>Buttons “ “ and ““ are used to increase or decrease the temperature settings while symbol " " flashes on the right hand of the temperature display. When you choose a cooking function, symbol " " keeps flashing for 5 seconds only. This is the useful interval to press buttons “ “ or ““ and select your temperature setting. Once these 5 seconds elapse, symbol " "
disappears and the thermometer symbol |
| comes |
|
on: this means that the current selection has been stored in the Oven Electronic Control memory and that the oven is currently heating up.
>Buttons “ “ and ““ are used to increase or decrease the time settings while the symbol is flashing near the "Clock" symbol , the "Minute Minder" symbol , the "Cooking Duration"
symbol or the "End Of Cooking Time" symbol .
When you choose a time function, symbol keeps flashing for 5 seconds only. This is the useful interval to press buttons “ “ or ““ and select your time setting. Once these 5 seconds elapse, symbol stops flashing: this means that the current selection has been stored in the Oven Electronic Control memory.
8
Fig. 8
Fig. 9