Ventilation requirements

The airflow behind the ap- pliance must be sufficient.

50 mm

min.

 

200 cm2

 

min.

 

200 cm2

Installing the appliance

Caution! Make sure that the mains cable can move freely.

Do the following steps:

2

1

4mm

44mm

I

I

Install the appliance in the niche.

Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the appliance and the cup- board front-edge is 44 mm. Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge. Make sure that the clear- ance between the appliance and the cupboard is 4 mm.

Adjust the appliance in the niche.

The lower hinge cover (in the accessories bag) makes sure that the distance be- tween the appliance and the kitchen furniture is correct. Open the door. Put the low- er hinge cover in position.

Attach the appliance to the niche with 4 screws.

Push the sealing strip be- tween the appliance and the adjacent cabinet.

10

Page 10
Image 10
Zanussi ZBT3204 user manual Installing the appliance, Do the following steps, Install the appliance in the niche