![](/images/new-backgrounds/1086503/8650317x1.webp)
Technical data
Dimension of the recess Height
Width
Depth
Rising Time
1225 mm
560mm
550mm
20h
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
Installation
Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance
before installing the appliance.
Positioning
Install this appliance at a location where the ambient tem- perature corresponds to the climate class indicated on the rating plate of the appliance:
Climate | Ambient temperature |
class |
|
SN | +10°C to + 32°C |
N | +16°C to + 32°C |
ST | +16°C to + 38°C |
T | +16°C to + 43°C |
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
Door reversibility
The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance:
• Loosen the upper pin | • Loosen the middle |
and remove the spacer. | hinge. |
• Remove the upper pin |
|
and the upper door. |
|
•Remove the lower door.
•Loosen the lower pin.
On the opposite side:
•Install the lower pin.
•Install the lower door.
•Tighten the middle hinge.
•Install the upper door.
•Tighten the spacer and tighten the upper pin.
9