Zanussi ZBT6234 Technical data, Installation, Closing the door, Positioning, Door reversibility

Models: ZBT6234

1 16
Download 16 pages 49.54 Kb
Page 9
Image 9
Closing the door

7. Open the door. Make sure that the light comes on.

Closing the door

1. Clean the door gaskets.

2.If necessary, adjust the door. Refer to "Installation".

3.If necessary, replace the defective door gaskets. Con- tact the Service Center.

Technical data

Dimension of the recessTechnical data Height

Installation Width

Positioning Depth

Rising Time

1446 mm

560mm

550mm

20h

The technical information are situated in the rating plate on the internal left side of the appliance and in the ener- gy label.

Installation

Caution! Read the "Safety Information" carefully for your safety and correct operation of the

appliance before installing the appliance.

Positioning

Install this appliance at a location where the ambient tem- perature corresponds to the climate class indicated on the rating plate of the appliance:

Climate

Ambient temperature

class

 

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequen- cy shown on the rating plate correspond to your domes- tic power supply.

The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with cur- rent regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Door reversibility

The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance:

9

Page 9
Image 9
Zanussi ZBT6234 Technical data, Installation, Closing the door, Positioning, Electrical connection, Door reversibility