Zanussi ZCF 52 C installation manual Technical Specifications, Installation, Positioning

Models: ZCF 52 C

1 16
Download 16 pages 18.66 Kb
Page 14
Image 14
Technical Specifications

Technical Specifications

Model

Volume (gross)

Volume (net)

Height with rollers

Width

Depth

Weight

Energy consumpt./24h

Freezing capacity

Hold-over time

Rated power

litres

litres

cm

cm

cm

kg

kWh

kg/24h

hours

W

ZCF 52 C

147

143

87,6/88,3

59,5

66,5

35

0,78

13

25

80

Installation this appliance complies with the following EC Directives:

-73/23/EEC of 19. 02. 1973 - Low-Voltage Directive

-89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive. Some of the models are not available in all countries.

Testing has been carried out in accordance with ISO 5155 regarding the determination of freezer capacity, energy consumption and hold-overtime. Information for test institute: A plan of the positioning of test packages may be obtained directly from the manufacturer.

Installation

Positioning

Place the freezer horizontally on a firm surface, resting on all four wheels. Use a wooden block or similar object to compensate for any bumps/holes in the floor's surface.

The room should be dry and adequately ventilated.

If the room temperature exceeds 32°C, or falls below freezing point, the freezer will not function as it should.

Do not place the freezer close to sources of heat, radiators, chimneys, etc. and do not place the freezer in direct sunlight.

If the freezer has been handled standing on end, it should be allowed to stand in the normal position for about 12 hours before switching it on.

Ensure that the appliance is installed where it is easily accessible for the engineer in the event of a breakdown.

14

Page 14
Image 14
Zanussi ZCF 52 C installation manual Technical Specifications, Installation, Positioning