Z C G 7 9 0 0 X

The electronic timer

Please note that this is a 24 hour clock, for example 2.00 pm is shown as 1400.

Cookpot symbol

Bell symbol

In the following pages we explain

 

 

 

how to set the controls. Read through

 

 

 

them a few times until you are familiar

 

 

 

with the procedure. We have supplied a

 

 

 

plastic card as a quick reference when

 

 

 

 

 

 

setting the timer.

 

 

 

 

 

 

Selector

Setting knob

 

If the oven is switched off on the wall, or there is a loss of power, the clock will stop and you will not be able to use the main oven. When you first switch the electricity supply on, the timer display will flash.

To set the time of day

Turn the selector knob to 'Manual' then turn to 'Time Setting'.

Set the correct time by turning and holding the setting knob clockwise. Adjust the time by turning the setting knob in either direction.

Turn the selector knob back to 'Manual'.

To use the countdown

Turn the selector knob to 'Countdown'. Turn the setting knob clockwise until the display shows the time you want.

The bell symbol ( ) will be showing and this will stay lit up during the time. Our diagram shows the timer set to 5 minutes.

If you change your mind and want to cancel the time you have set, simply turn the setting knob anticlockwise. Then turn the selector to 'Manual'.

The electronic timer

21

Page 21
Image 21
Zanussi ZCG 7900X Electronic timer, To set the time of day, To use the countdown, Turn the selector knob back to Manual