General information

Z C G 7 9 0 0 X

If the ignition system doesn't work there may be a fault with the e ectrical supply. First, check the socket by trying out another piece of e ectrical equipment in it, if that works correctly renew the fuse in the p ug.

If the fuse keeps failing there is a fault in the cooker which must be put right. Do not use a fuse with a rating higher than 3 amps. Do not carry out other electrical work. Unplug the cooker and tell your installer.

Replacing the oven light bulb

You need a 25 Watt small Edison screw with a temperature rating of T300.

Make sure the oven is cool before you replace a bulb.

Unplug the cooker.

Open the oven door and remove the oven shelves.

Place palm of hand at top of lens flat against oven side. Use fingers to lever lens away from housing.

Unscrew the bulb by turning it to the left. Fit a new bulb and then replace the glassbulb cover.

lReplace the oven shelves.

Plug the cooker back into the electricity supply.

The oven light bulb is not covered by the manufacturers guarantee.

36

Page 36
Image 36
Zanussi ZCG 7900X manual Replacing the oven light bulb