4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

50 100

850

Fig.3

700

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

450

All dimensions in mm

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED.

DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING.

This appliance must be connected to 230V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug , fitted

with a 3 amp fuse, which can be plugged directly into the

nearest suitable socket. Ensure the plug is accessible toFig.4 the user. If this is not long enough, the supply cable can

be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE

FOR ANY REASON, IT MUST BE DESTROYED OR

DISPOSED OF SAFELY, AS THE PROTRUDING

WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3 amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in

cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

47

Page 47
Image 47
Zanussi ZCG 7901X manual Connecting to GAS, Connection to the Electricity Supply

ZCG 7901X specifications

The Zanussi ZCG 7901X is a standout appliance in the world of cooking technology, combining precision engineering with user-friendly features. This freestanding gas cooker not only proves to be an essential tool in the kitchen but also a stylish addition that enhances the cooking experience.

One of the key features of the ZCG 7901X is its powerful gas hob, equipped with four burners. This allows for versatile cooking options, whether you're boiling, simmering, or frying. The burners vary in size, accommodating everything from small saucepans to larger pots, providing flexibility for all your cooking needs. With features such as a sturdy cast iron support, the cooker is built for stability and durability.

The oven section of the ZCG 7901X boasts a generous capacity, providing ample space for roasting, baking, and other culinary endeavors. The fan-assisted convection feature ensures even heat distribution throughout the oven, allowing for consistent cooking results. This technology is particularly beneficial for baking, delivering perfectly risen cakes and evenly cooked roasts.

Moreover, the cooker comes with a grill function, adding another dimension to your cooking repertoire. The grill allows for healthier cooking options, giving you the ability to prepare delicious grilled meats and vegetables with ease. The integrated ignition system makes lighting the burners straightforward, ensuring safety and convenience.

Cleaning is made easy with the enamel-coated surface of the oven, which helps prevent food from sticking and facilitates a quick wipe-down after use. The removable oven door and shelves further enhance cleaning efficiency, ensuring the appliance maintains its sleek appearance.

Energy efficiency is also a priority with the Zanussi ZCG 7901X. Designed to operate on gas, it provides cost-effective energy usage while delivering high performance. The appliance is designed to make it easier for users to enjoy a wide range of dishes without compromising on quality or efficiency.

In summary, the Zanussi ZCG 7901X combines functionality with user-oriented design. With its robust gas hob, spacious oven, and multiple cooking modes, it is ideal for both novice cooks and seasoned chefs alike. Its thoughtful features underscore Zanussi's commitment to bringing innovative solutions into every kitchen, making it a valuable asset for culinary enthusiasts.