Pressure Testing, Checking the Grill | Zanussi ZCG 7901X specs

If the wiring is extended or a completely new cable fitted a

3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the. Fig 4a

wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or

by the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured

BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket. Plug in the appliance.

6. PRESSURE TESTING

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

ZCG 7901X specifications

The Zanussi ZCG 7901X is a standout appliance in the world of cooking technology, combining precision engineering with user-friendly features. This freestanding gas cooker not only proves to be an essential tool in the kitchen but also a stylish addition that enhances the cooking experience.

One of the key features of the ZCG 7901X is its powerful gas hob, equipped with four burners. This allows for versatile cooking options, whether you're boiling, simmering, or frying. The burners vary in size, accommodating everything from small saucepans to larger pots, providing flexibility for all your cooking needs. With features such as a sturdy cast iron support, the cooker is built for stability and durability.

The oven section of the ZCG 7901X boasts a generous capacity, providing ample space for roasting, baking, and other culinary endeavors. The fan-assisted convection feature ensures even heat distribution throughout the oven, allowing for consistent cooking results. This technology is particularly beneficial for baking, delivering perfectly risen cakes and evenly cooked roasts.

Moreover, the cooker comes with a grill function, adding another dimension to your cooking repertoire. The grill allows for healthier cooking options, giving you the ability to prepare delicious grilled meats and vegetables with ease. The integrated ignition system makes lighting the burners straightforward, ensuring safety and convenience.

Cleaning is made easy with the enamel-coated surface of the oven, which helps prevent food from sticking and facilitates a quick wipe-down after use. The removable oven door and shelves further enhance cleaning efficiency, ensuring the appliance maintains its sleek appearance.

Energy efficiency is also a priority with the Zanussi ZCG 7901X. Designed to operate on gas, it provides cost-effective energy usage while delivering high performance. The appliance is designed to make it easier for users to enjoy a wide range of dishes without compromising on quality or efficiency.

In summary, the Zanussi ZCG 7901X combines functionality with user-oriented design. With its robust gas hob, spacious oven, and multiple cooking modes, it is ideal for both novice cooks and seasoned chefs alike. Its thoughtful features underscore Zanussi's commitment to bringing innovative solutions into every kitchen, making it a valuable asset for culinary enthusiasts.

Zanussi ZCG 7901X manual Pressure Testing, Checking the Grill, Checking the Hotplate

Models: ZCG 7901X