4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

50 100

Fig.3

850

700

250

450

All dimensions in mm

All dimensions in mm

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED. DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING.

This appliance must be connected to 220V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug , fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. If this is not long enough, the supply cable can be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE

FOR ANY REASON, IT MUST BE DESTROYED OR

DISPOSED OF SAFELY, AS THE PROTRUDING

WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 5

amp fuse in either the plug or adapter or at the distributionFig.4 board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

48

Page 48
Image 48
Zanussi ZCG ID manual Connecting to GAS, Connection to the Electricity Supply

ZCG ID specifications

The Zanussi ZCG ID is a highly regarded model in the realm of kitchen appliances, especially known for its reliability and performance in cooking. Designed with both functionality and user convenience in mind, this gas cooker has become a popular choice among home cooks and culinary enthusiasts alike.

One of the standout features of the Zanussi ZCG ID is its efficient gas burners. It typically includes four gas burners that offer flexible cooking options, allowing users to simmer sauces, boil pasta, or sear meats with ease. The burners' different sizes cater to various cooking needs, providing versatility in meal preparation. The heat is instantly adjustable, giving cooks control over temperature settings for precision cooking.

A noteworthy characteristic of the Zanussi ZCG ID is its spacious oven. The oven often comes with a generous capacity, which enables cooking large meals or multiple dishes simultaneously. This is particularly beneficial for families or individuals who love hosting gatherings. The oven's advanced heating technology ensures even heat distribution, promoting consistent cooking results across all trays.

Zanussi integrates user-friendly technologies in the ZCG ID, including programmable timers and thermostats. These features help home cooks manage cooking times efficiently, allowing them to focus on other tasks while ensuring their meals are cooked to perfection. The modern design typically includes a clear display, making it easy to monitor cooking progress at a glance.

In terms of safety, the Zanussi ZCG ID is equipped with essential features such as flame failure cut-off devices, which provide peace of mind by automatically shutting off the gas supply when the flame is extinguished. This feature is particularly important for households with children or pets.

The design of the Zanussi ZCG ID is not only functional but also aesthetically pleasing. Its sleek finish complements various kitchen décors, enhancing the overall look of any cooking space. The easy-to-clean surfaces, alongside removable oven racks and burners, make maintenance straightforward, ensuring that the appliance remains in good condition over time.

In summary, the Zanussi ZCG ID gas cooker combines practical features, advanced cooking technologies, and a user-friendly design. Its efficient burners, spacious oven, programmable settings, and safety mechanisms make it an excellent option for anyone looking to elevate their cooking experience. Whether it's daily meals or special occasions, the Zanussi ZCG ID stands poised to meet the challenges of modern kitchens.