Zanussi ZD 699 ALU Fitting the vapour protection, Noise protection, Kitchen plinth adjustment

Fitting the vapour protection

Fit the adhesive protection foil onto the front part of the worktop; along the entire width.

Noise protection

Adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted.

Apply the protection as shown in the drawing, making sure that the non-adhesive section reaches right down to the floor.

Kitchen plinth adjustment

To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table.

According to dimensions (	a ) and ( b ) as shown on the
figure, you will find on the following table the depth (		x )
of the cut to be made on the plinth.

The dimensions ( a ) and ( b ) of the table are those most frequently used in the kitchen furnitures.

Depth ( b )*

II21

II61

	a
II15	b
		II111
	Height (	a )*

	170	160	150	140	130	120	110	100	90
40	136	131	125	118	110	100	93	85	75
50	135	131	125	118	110	102	92	85	75
60	137	132	125	118	110	102	94	85	75
70	138	134	128	120	110	104	95	85	75	X
80	/	139	130	124	115	105	98	88	78
90	/	/	138	129	120	110	100	90	80
100	/	/	/	135	125	115	105	95	85

( )dimensions in mm	600 mm
*	minimum

X

Dimensions of the cut on the plinth

31 INS71en