1.Adjust the height of the door by turning the adjustment nut ( B ) in the counterclockwise
direction ( 
) with a spanner.
(Turn it in the counterclockwise direction ( 
)
to increase the height of the door and in the
clockwise direction ( 
) to decrease it.)
( A )
2.Once the doors are level, turn the clamping nut
( A ) in the counterclockwise direction (
) to tighten it.
( A )
Adjusting the level when the refrigerator is empty can result in the refrigerator becoming uneven again once items have been placed inside.
If this occurs, adjust the level again.
If the gap between the refrigerator door and the freezer door is uneven:
•Use the gap adjustor located at the top of the refrigerator door (right side).
•Excessive force can cause the adjustor bolt to break.
1. Remove the refrigerator door’s hinge cover.
2.Adjust the gap using a 4 mm Allen wrench (not included).
3.Rotate the bolt in the clockwise direction ( 
) to widen the gap.
Rotate it in the counterclockwise direction
( 
) to narrow the gap.
Adjust until the gap between the refrigerator door and the freezer door appears even.
When arranging the cables, take caution CAUTION not to tear or peel off the cable coating.
setting up
English - 23
2017. 7. 7. �� 2:18 |