Check the amount of water supplied to the ice tray.
1.Lift up the icemaker cover and gently pull it out.
2.When you press the Test button for 3 seconds, the ice cube container is filled with water from the water supply tap.
Check to make sure the amount of water is correct (see the illustration below).
If the water level is too low, the ice cubes will be small.
This is a water pressure problem from within the main water pipes, not the refrigerator.
Check the water level
1 |
|
| 2 |
Ice maker | Test button |
|
•It will take a few minutes for the water to CAUTION reach the correct level after you push the
Test button.
•Do not press the test button continuously when
the tray is filled with ice or water.
Water may overflow or ice jamming may occur.
•When the bucket is not installed, the ice maker does not work.
•When Ice Off blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.
English - 28
2017. 7. 7. �� 2:18 |
