If the freezer side is lower:
•Insert a flathead screwdriver into the height leveler located at the bottom back of the freezer door and turn it in the direction of the arrow until it is level.
If refrigerator door is lower than the other:
•The door height levels can be adjusted using the adjustment nut located at the bottom of refrigerator door.
•Raising the door too high can cause the door to interfere with the hinge cover when it is opened or closed.
If the refrigerator side is lower:
•Insert a flathead screwdriver into the height leveler located at the bottom back of the refrigerator door and turn in the direction of the arrow until it is level.
( B )
( A )
1.Open the door that needs to be adjusted and loosen the clamping nut ( A ) at the bottom of the door by turning it in the clockwise direction
( 
) using the spanner included in the product package.
• Raise the front of the refrigerator so that | ( A ) | |
the doors close by themselves. | ||
| ||
Adjusting the levelers so that the back |
| |
of the refrigerator is much higher than |
| |
the front of the refrigerator can make it |
| |
difficult to open the doors. |
|
•If the back of the refrigerator is not level, support the bottom with an appropriately sized object and secure the object in place using tape.
Slide the refrigerator into its spot and then adjust the level.
•When pushing the refrigerator in, be careful not to damage the floor.
English - 22
2017. 7. 7. �� 2:18 |