When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.

SEVERE WARNING WARNING SIGNS FOR

INSTALLATION

•Do not install this appliance in a humid,

oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

-- Deteriorated insulation of electrical parts may cause an electric shock or fire.

•Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliances.

•Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matched the rating plate.

-- This provides the best

performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

If the wall socket is loose, do not insert the power plug.

-- There is a risk of electric shock or fire.

•Do not use a cord that shows cracks or abrasion damage along its length or at either end.

•Do not bend the power cord excessively or place heavy articles on it.

•Do not use aerosols near the refrigerator.

-- Aerosols used near the refrigerator may cause an explosion or fire.

•Do not install this appliance in a location where gas may leak.

-- This may result in an electric shock or fire.

• The installation or any service of this appliance is recommended by a qualified technician or service company.

-- Failing to do so may result

in an electric shock, fire,

safetyinformation

English - 5

DA68-03015D-10.indb 5

2017. 7. 7. �� 2:18