125986546.qxp
9.Select the Start/Pause
Press this button to start the dryer after having selected the programme and the options.
The relevant light will stop flashing. If the programme selector dial is turned to anoth- er position, when the machine is running, the buzzer will sound and the programme phase indicator lights will flash.
The drum turns alter- nately in both direc- tions during drying.
All drying pro- grammes end with a 10 minute cooling phase (light Cooling is on).
You may remove the laundry after this phase.
The lights Empty Tank and Filter illuminate and the buzzer sounds.
If the door of the appliance or the small door at the bottom is opened while the pro- gramme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted.
This button must be depressed also after a power failure and after having reinserted the water reservoir, if it has been emptied in the middle of a pro- gramme after lighting up of the light Empty Tank.
In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.
10. Indicator lights
These lights indicate the following functions:
“Drying” light
This light indicates that the appliance is in the drying phase.
“Cooling” light
This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.
“End of programme” light
This light is on at the end of the cooling phase, during the
“Filter cleaning” light
This light illuminates at the end of the pro- gramme to remind you that the filters must be cleaned.
“Water reservoir full” light
This light comes on at the end of the pro- gramme to remind you that the water reservoir must be emptied out. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the
programme stops, the light of the Start/Pause button flashes.
“Condenser clean- ing” light
It comes on every 80 cycles to remind you that the condenser must be cleaned.
11.At the end of the programme
All drying pro- grammes end with a 10 minute cooling phase.
You may remove the laundry after this phase. The lights Filter and Empty Tank, illuminate.
If the laundry is not removed at the end of the cycle, the dryer performs an anti- creasing phase (dura- tion: 30 minutes maxi- mum). If you do not remove the laundry, the dryer will stop automatically at the end of the
The Lights Filter and The Empty Tank remain lit and the buzzer sounds for 2 minutes.
Turn the programme selector dial to “Off” to
11
