Manuals / Brother / Household Appliance / Sewing Machine

Brother 882-W02, 882-W01 operation manual Error Messages, 335

Models: 882-W01 882-W02

1 376

Download 376 pages 39.41 Kb

Page 349

ERROR MESSAGES

ERROR MESSAGES

If the machine is not properly set and the “Start/Stop” button or the “Reverse/Reinforcement Stitch” button is pressed, or if the operation procedure is incorrect, the machine does not start. An alarm sounds and an error message is displayed on the LCD. If an error message displays, follow the instructions in the message.

Below is an explanation of error messages. Refer to these when necessary (if you press or do the operation correctly while the error message is displayed, the message disappears).

CAUTION

•Be sure to rethread the machine. If you press the “Start/Stop” button without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury.

This message is displayed when the motor locks due to tangled thread or for other reasons related to thread delivery.

This message is displayed when the embroidery unit is initializing.

This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed.

This message is displayed when the needle plate is removed with the machine on or when the machine is turned on and embroidery or embroidery edit mode is selected (see page 43).

This message is displayed when the machine needs to be maintained. (see page 328)

This message is displayed when the needle plate cover is not attached.

This message is displayed when you try to combine more than 71 patterns.

This message is displayed when the buttonhole lever is up, a buttonhole stitch is selected, and the “Start/ Stop” button or “Reverse/ Reinforcement Stitch” button is pushed.

This message is displayed when the speed control lever is set to control the zigzag stitch width, and the “Start/ Stop” button is pushed. Use the foot controller to operate the machine.

8

Appendix

335

Image 349

Brother 882-W02, 882-W01 operation manual Error Messages, 335

Contents

Computerized Embroidery and Sewing Machine Trademarks Read Before DOWNLOADING, COPYING, Installing or UsingIntroduction Important Safety Instructions8For repair or adjustment For Users in the UK, EIRE, Malta Cyprus only Important Safety Instructions Label location Checking the Needle Location in the Screen Edge Sewing Outstanding FeaturesPrint and Stitch Combining the Embroidery and Printing Duplicating a PatternSewing Basics What YOU can do with this MachineHOW to USE this Manual Contents Embroidery 181 Xii Front View MachineRight-side/Rear View Presser foot Needle and Presser Foot SectionOperation Buttons Embroidery UnitUsing the Accessory Case Using the Flat Bed AttachmentOpening the Accessory Case Closing the Accessory CaseIncluded Accessories Using the Embroidery Unit Carrying CaseStoring Bobbin Clips 75/11 Part Code SABF6000D OptionsHow to Assemble the Spool Stand Using the Spool StandHow to Remove Getting Ready Turning the Machine ON/OFF Turn the main power switch to O to turn off the machine Turn the main power switch to I to turn on the machineHome Page Screen LCD ScreenUtility Stitch LCD Screen D e U t J k l Key FunctionsPresser foot/Needle USB Connectivity Using a USB Mouse Connecting the Machine to the ComputerChanging Pages Clicking a KeyLCD Screen Sewing settings Using the Machine Setting Mode KeyGeneral settings Embroidery settings Display 3/7 page 3 of 7 of the General settings screen Changing the Pointer Shape When a USB Mouse Is UsedChanging the Screen Saver Image PressSewing settings screen appears HSelect the device that is connected GPress to select the first imageIPress a file name to select image and then Press to return to the original screen Selecting the Initial Screen DisplayEPress to return to the original screen Choosing the Display LanguageChanging the Background Colors of the Embroidery Patterns Press to return to the original screen Select the background color from the 66 settings availableUsing the Sewing Machine Help Key Using the Operation Guide Function Read the instructions Using the Sewing Guide FunctionEnterpage. Utility Stitch category from the home Press APress Using the Pattern Explanation FunctionRead the explanations and select the appropriate stitch Screen shows information Lower Threading Using the Supplemental Spool PinWinding the Bobbin Setposition.the supplemental spool pin in the up Guide slit with built-in cutter Bobbin winder seat Using the Spool Pin Pass the thread through the thread guide Using the Spool StandHFollowthroughsteps40. g through k on Untangling Thread from Beneath the Bobbin Winder Seat Press Slide the bobbin cover latch to the right Setting the BobbinCutter Cutter cuts the thread Replace the bobbin cover Pulling Up the Bobbin ThreadUpper Threading Upper ThreadingPress the Needle Position button to raise the needle Look in the upper groove area Needle bar thread guide Using the Twin Needle Mode Press and install the twin needle Changing the Needle on IPress Select a stitch pattern. Example KPress to select the twin needle modeStart sewing When using thread on a cone spool, use the spool holder Using the Spool Net Using Threads that Unwind QuicklyRemoving the Presser Foot Changing the Presser FootAttaching the Presser Foot Raise the presser foot leverMemo Attaching the Walking FootChanging the Needle Press to unlock all keys and buttons Fabric/Thread/Needle Combinations About the NeedleSewing Basics Sewing Install the presser foot Changing the Presser Foot onSewing a Stitch Lower the presser footAdjust the sewing speed with the speed control slide Using the Foot ControllerSewing Curves Sewing Reinforcement StitchesChanging Sewing Direction Sewing Heavyweight FabricsSewing a Seam Allowance of 0.5 cm or Less If the Fabric does not Fit under the Presser FootSewing Hook-and-Loop Fastener Sewing Lightweight FabricsIf the Fabric does not Feed Sewing Stretch Fabrics Setting the Stitch Width Stitch SettingsSetting the Thread Tension Setting the Stitch LengthProper Thread Tension Upper Thread is Too Loose Upper Thread is Too TightAutomatic Reinforcement Stitching Useful FunctionsSelect a stitch pattern Setsewing.the fabric in the start position and start Automatic Thread CuttingUsing the Knee Lifter Pivoting Select a stitch BPress to select the pivot settingCPress to return to the original screen Rotate the fabric, and then press the Start/ Stop buttonLocking the Screen Needle Position Stitch PlacementSew your project Checking the Needle Location in the ScreenUseful Functions Utility Stitches Stitch Selection Screens Selecting Utility StitchesSelecting a Stitch Using the Mirror Image KeyBUse to select the category you want Press to go back to the original screen Using the Image KeySaving Settings Saving Your Stitch SettingsSelect a stitch Retrieving Saved SettingsStraight Stitches Sewing the StitchesPressforward.the Start/Stop button to sew Select a stitch Attach presser foot JExample Left/Middle needle position stitches Grasp the bobbin case, and then pull it out Or pressJInsertfoot. needle and attach the straight stitch BastingSew while keeping the fabric straight Gathering Dart SeamASelect and attach presser foot J Selectfoot J.a straight stitch and attach presserSpread the fabric out along the finish line Flat Fell SeamGSew on the seam line and remove Basting stitch Iron the folds in the same direction PintuckAppliqué Using a Zigzag Stitch Overcasting Using a Zigzag StitchZigzag Stitches Cord Guide Bobbin Cover Using a Zigzag Stitch Sewing Curves Using a Zigzag StitchPatchwork for Crazy Quilt Remove the bobbin cover from the machine seeTape Attaching Elastic Zigzag StitchesOvercasting Overcasting Overcasting Using Presser Foot GOvercasting Using Presser Foot J Overcasting Using the Side Cutter Notch in presser foot holder Pin Side cutter is attached Lower the presser foot and start When Sewing Straight Stitches While Using the Side CutterZigzag stitch Left Quilting100 Sewing the Stitches 101Piecing 102Quilting ASelect or and attach presser foot JAppliqué 103Quilting with Satin Stitches 104105 Using Free motion Quilting Foot CFree Motion Quilting BSelect or106 Press to set the machine to free motion sewing modeDRemove55. the presser foot holder see Using free motion Open Toe Quilting Foot O HPress to cancel the free motion sewing mode107 GPressmode. to cancel the free motion sewing Echo Quilting Using the Free Motion Echo Quilting Foot E108 109 ASelect Press to set the machine to free motion sewing mode110 HPress to cancel the free motion sewing mode111 Blind Hem StitchesTurn the skirt or pants wrong side out Attach blind hem foot R GSelect or 112113 AppliquéIf the Needle Catches Too Much of the Hem Fold If the Needle does not Catch the Hem Fold114 Shelltuck StitchesAppliqué Sharp Curves Appliqué Corners115 Scallop StitchesTrim along the seam, making sure not to cut the stitches Smocking Stitches Crazy Quilting116 Tape or Elastic Attaching Fagoting117 HPull out the straight stitch threadsESelect or 118Sew over the tape or elastic Pull out the straight stitch threads119 HeirloomHemstitching 1 Daisy Stitch Hemstitching 2 Drawn WorkHemstitching 3 Drawn Work 120121 One-step Buttonholes122 123 Sewing Stretch Fabrics 124Lower the presser foot and start sewing 125 Four-step Buttonholes126 Darning 127128 129 Bar TacksBar Tacks on Thick Fabrics 130Gently hold the end of the upper thread and begin sewing 131 Button SewingRaise the presser foot Gently hold the end of the upper thread and start sewingAttaching 4 Hole Buttons 132Attaching a Shank to the Button Pullsewing.the shank lever toward you before133 EyeletMulti-directional Sewing Straight Stitch and Zigzag Stitch 134BSelect and attach monogramming foot N 135 Zipper InsertionCentered Zipper Inserting a Side Zipper 136Set the presser foot in the 3 mm approx /8 inch margin 137138 Edge SewingBAttachV. the vertical stitch alignment foot 139Peel off the transparent sheet of the edge sewing sheet EPress 140141 When the Built-In Camera Can Detect the Edge of the Fabric142 When the Fabric Edge Indicator Line Does Not Appear143 Example When a straight stitch is selectedPress 144Character/Decorative Stitches 146 Selecting Stitch Patterns7mm Satin Stitch Patterns Cross Stitch 147Alphabet Characters Cross Stitch/Utility Decorative Stitch Patterns148 Press , or to select a fontCPress Then enter B EPress 149DPress and then enter lue FPress again and enter S 150 Adjusting the Character SpacingDeleting Characters 151 BPress to adjust character spacingSewing Attractive Finishes Sewing Stitch PatternsBasic Sewing 152153 Making AdjustmentsAPress Select On 16/16 Sew the stitch pattern again 154FPress to return to the original screen 155 Editing Stitch Patterns156 Creating a Vertical Mirror Image Changing the Size157 Actual Stitch Pattern SizeSewing a Pattern Continuously Creating a Horizontal Mirror ImageChanging Thread Density For Satin Stitch Patterns Only 158159 Returning to the Beginning of the PatternPress the Start/Stop button to stop Machine, and then press 160 Checking the ImagePress to display the enlarged image Press to return to the original screen 161Before Combining Combining Stitch PatternsCombining Various Stitch Patterns 162163 164 Combining Large and Small Stitch PatternsImage Stitch Patterns Combining Horizontal MirrorCombining Stitch Patterns of Different Length 165BSelect again, then press 3 times 166Press BPress 167CPress again EPress DPressMore Examples 168Stitch Data Precautions Using the Memory Function169 Trademarks 170171 Saving Stitch Patterns in the Machine’s MemoryIf the Memory is Full 172Choose a stitch pattern to delete 173 174 Saving Stitch Patterns to USB Media175 Saving Stitch Patterns in the Computer176 Retrieving Stitch Patterns from the Machine’s Memory177 Recalling from USB MediaChoose a stitch pattern to retrieve 178 179 Recalling from the Computer180 Embroidery Embroidery Step by Step Before Embroidering182 183 Attaching Embroidery Foot W184 Attaching the Embroidery UnitAbout the Embroidery Unit HPress to unlock all keys and buttonsTurn the main power to OFF Turn the main power to on185 Removing the Embroidery Unit186 Selecting PatternsCopyright Information Pattern Selection Screens 187188 Press the key of the pattern you want to embroider 189190 Selecting Alphabet Character PatternsDPress and then enter B 191192 Selecting Frame PatternsHPress and then enter ky Press the key of the frame pattern you want to embroider 193194 Selecting Patterns from Embroidery CardsFollowpattern.the steps on page 189 to select a 195 Selecting Patterns from USB Media/Computer196 Viewing the Sewing ScreenKey Functions 197198 Preparing the Fabric199 200 Hooping the Fabric in the Embroidery FrameTypes of Embroidery Frames Inserting the Fabric 201Return the frame adjustment screw to its initial position Using the Embroidery Sheet202 Remove the embroidery sheet203 Embroidering Small Fabrics or Fabric EdgesEmbroidering Small Fabrics Embroidering Edges or Corners204 Attaching the Embroidery FrameWith the holder’s Removing the Embroidery Frame 205206 Confirming the Pattern PositionAfter selecting the pattern, press Then press 207Following message appears. Press 208209 Checking the Pattern PositionFabric, and press Press Press the Start/Stop button to begin embroidering210 Previewing the Completed PatternThat you want to check BPress to select the frame used in the preview 211212 Sewing AN Embroidery Pattern213 Sewing Embroidery PatternsEmbroidery Needle Plate Cover Press the Start/Stop button to start embroidering 214Sewing Embroidery Patterns Which Use Appliqué 215Press the Start/Stop button 216217 Using iron-on paper Using printable fabric218 Selecting a PatternChecking Only the Embroidery Pattern 219 Using USB Media220 Using a USB CablePrint the background image 221Cut the paper printed with the center 222Image on the fabric After checking that a pattern is selected Press223 If the Bobbin Runs Out of Thread224 If the Thread Breaks During SewingRestarting from the Beginning Resuming Embroidery After Turning Off the Power225 Attach the embroidery frame and press 226Continue embroidering Adjusting Thread Tension Making Embroidery Adjustments227 Correct Thread TensionCorrect Tension 228229 Using the Automatic Thread Cutting FunctionBobbin Thread is Too Loose Bobbin Thread is Too TightSelecting the Length of Jump Stitch Not to Trim 230Press BPress to turn off the thread trimming function Changing the Thread Color Display Adjusting the Embroidery Speed231 To change the maximum embroidery speedChanging the Embroidery Frame Display DWhen the thread number #123 is232 233 Changing the Pattern Position Revising the Pattern234 235 Aligning the Pattern and the NeedlePress EUse 236On the fabric, and begin embroidering the pattern APress BSelectsize. the direction in which to change237 Rotating the PatternAPress Select the angle of rotation for the pattern 238 Creating a Horizontal Mirror ImageAPress Change the density 239CPress to return to the pattern selection screen 240 Changing the Colors of Alphabet Character PatternsAPress so that it appears as 241 Embroidering Linked CharactersSelect the character patterns for ABC As in step a, select the character patterns for DEF Press 242MUse 243244 Embroidery Data PrecautionsTypes of Embroidery Data that can be Used Tajima .dst Embroidery Data 245246 Saving Embroidery Patterns in the Machine’s MemorySelect the pattern you want to delete 247248 249 Saving Embroidery Patterns to USB Media250 Saving Embroidery Patterns in the Computer251 Retrieving Patterns from the Machine’s MemoryCPress 252Pressretrieve.the key of the pattern you want to 253Pressrecall.the key of the pattern you want to 254FPress 255Embroidery Applications Using a Frame Pattern to Make an Appliqué256 257 258 259 Sewing Split Embroidery PatternsBSelect section to be embroidered If necessary, edit the pattern 260Embroidery Edit 262 Explanation of Functions263 Selecting Patterns to EditProceed to Editing Patterns on page 267 to edit the pattern 264Select the font, then enter the characters. Example a B C D 265Select the layout. Example CPress to change the layout of the patternAfter you finish your selections, press 266267 Editing PatternsF g L k 268269 Moving the Pattern270 Changing the Size of the PatternDeleting the Pattern Changing the Configuration Alphabet Character Patterns271 272 Changing Alphabet Character SpacingPress the key of the layout you want to embroider 273 Reducing Character SpacingBUse to change the spacing Separating Combined Character Patterns Use to select where the pattern is274 APress BPressUse to select a pattern, Then use 275Spacing BIn the sewing screen, press Press 276277 278 Changing the Thread ColorPattern editing screen, press 279 Creating a Custom Thread TableCPress to choose a new color from the color palette Add a color on the custom thread table 280EPress 281GPress to return to the original screen 282Color from the custom thread table 283284 Designing Repeated PatternsSewing Repeated Patterns 285 Adjust the spacing of the repeated patternRepeating One Element of a Repeated Pattern 286BUse and to select the cut line Color Sorting Repeated Patterns 287288 Assigning Thread Marks 289APress BPress CPress Sewn290 After EditingEditing Combined Patterns Combining Patterns291 Pattern BUse to view 2/7, then select PressPress Press to enter the alphabet characters 292FSelect and enter Spring 293 KWhen all editing is finished, pressSelecting combined embroidery pat- terns IPress to change the layout Characters. Press294 Sewing Combined PatternsColor order on the right side of the display BEmbroiderVarious Embroidering Functions Press , and then display 7/7 of the settings screenBasting Embroidery 295Creating an Appliqué Piece Screen DPress EPress to select the basting setting296 Creating an Appliqué PieceSelect the pattern, and edit it if necessary 297Screen EPress 298 FPress to select the appliqué settingApplique Material 299300 Using a Frame Pattern for the Out- lineHPress 301After selecting the pattern, press Then press 302Press 303Fabric and press 304305 Using the Memory Function306 Using iron-on paper Using printable fabric307 Selecting a Pattern308 Using USB Media309 Using a USB CablePrint the background image 310Positioned aligned with the background image on the fabric 311312 MY Custom Stitch 314 Designing a StitchDraw the stitch design on the grid sheet part code SA507 Decide the spacing of the stitchExamples of Custom Stitches 315316 Entering Stitch DataPress to add the point indicated by 317FUse To move 318Moving a Point 319Moving Part or All of the Design APress or to move to the point that you want to moveInserting New Points 320CPress or to move the section 321 Storing Custom Stitches in Your List Using Stored Custom Stitches322 323 Retrieving Stored StitchesSelect the stitch pattern 324 335 329Cleaning the LCD Screen Care and MaintenanceCleaning the Machine Casing Cleaning the Race327 Cleaning the Cutter in the Bobbin Case Area328 About the Maintenance MessageTurn the main power to OFF, then turn it back to on Adjusting the ScreenTouch Panel is Malfunctioning 329330 Troubleshooting331 332 Chart333 334 335 Error Messages336 337 This message is displayed 338339 340 341 342 Alarm Sounds343 SpecificationsUpgrading Your MACHINE’S Software Upgrade Procedure Using USB Media344 Copy the upgrade file to Removable Disk Upgrade Procedure Using Computer345 Remove the USB media, and turn the machine off and on again346 When the message disappears, pressUnplug the USB cable, and turn the machine off and on again 347 Stitch Setting Chart348 Stippling 349350 351 352 353 354 355 356 IndexMY Custom Stitch 357358 SettingsPage Page