Brother 882-W02, 882-W01 operation manual 143, Example When a straight stitch is selected

SEWING THE STITCHES

Example: When a straight stitch is selected

(example: )

aMiddle needle position

bStitching

cEdge of fabric

dWidth of edge sewing

Note

•Distances between 1.5 mm (about 1/16 inch) and 38.5 mm (about 1-1/2 inches) can be measured. The distance is displayed in the screen in 0.5 mm (about 1/64 inch) increments.

•The distance is displayed in millimeters. However, depending on the measurement setting, it can also be displayed in inches.

•If “-_- mm” appears as the distance and no inch measurement is displayed, the built-in camera is not able to detect the edge of the fabric.

•When a straight stitch is selected, use the scale on the edge sewing sheet as a guide for positioning the fabric for edge sewing.

kLower the presser foot.

￿The distance from the edge of the fabric to the seam is set.

Memo

•If the knee lifter is used to lower the presser foot, the fabric can be held in place with both hands so the fabric does not move when the presser foot is lowered.

lPresssewing.the “Start/Stop” button to start edge

￿Sewing starts with the set distance to the edge of the fabric maintained.

*While sewing, use the red scale marks on the vertical stitch alignment foot “V” as a guide to keep a fixed distance from the edge of the fabric.

aRed scale marks

*When sewing starts, a still image from the built-in camera is displayed.

Note

•While sewing, do not place anything, including your hands, within 2 mm (about 1/ 16 inch) from the edge of the fabric, otherwise the edge of the fabric cannot be detected correctly. When guiding the fabric with your hands, place them outside of the object-free area and more than 2 mm (about 1/16 inch) from the edge of the fabric.

3

Utility Stitches

a Scale on the edge sewing sheet

a Approximately 2 mm (about 1/16 inch) b Fabric

c Edge of fabric

143