Brother 882-W01, 882-W02 operation manual Crazy Quilting, Smocking Stitches, 116

SEWING THE STITCHES

Crazy Quilting

For a decorative look called “Crazy Quilting”, the following stitches can be sewn on top of a pressed seam allowance.

aSelectfoot “J”.a straight stitch and attach presser

bWith the right sides facing each other, sew two pieces of fabric together, and then press open the seam allowance.

aStraight stitch

bSeam margins

c6.5 mm (approx. 1/4 inch)

dWrong side

cSelect a stitch for top stitching.

dPlace the fabric right side up in the machine, and center the presser foot over the seam when sewing.

aRight side of fabric

Smocking Stitches

Use smocking stitches for decorative sewing on clothes, etc.

aSelectfoot “J”.a straight stitch and attach presser

bSet the stitch length to 4.0 mm (approx. 3/16 inch) and loosen the upper thread tension to approximately 2.0 (see “Setting the Stitch Length” on page 67 and “Setting the Thread Tension” on page 67).

cPull the bobbin and upper threads out by 50 mm (approx. 1-15/16 inches).

dSew the seams, leaving approximately 10 mm (approx. 3/8 inch) between the seams, then trim excess thread, leaving 50 mm (approx. 1-15/16 inches).

aApproximately 10 mm (approx. 3/8 inch)

ePull the bobbin threads to obtain the desired amount of gather, and then smooth the gathers by ironing them.

fSelect or .

Memo

•For details on each stitch, refer to the “STITCH SETTING CHART” at the end of this manual.

116