Brother 882-W01, 882-W02 222, Cut the paper printed with the center, Image on the fabric

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)

dIf an iron-on transfer sheet is used, transfer the image onto fabric.

Memo

•For details on transferring from iron-on transfer sheets, refer to the instructions for the iron-on transfer sheets.

•If necessary, cut the iron-on transfer sheet to the size of the pattern before transferring the image.

Sewing Embroidery Patterns

aHoop in the embroidery frame the fabric with the background image ironed on.

bCut the paper printed with the center

positioning image so it can easily be positioned aligned with the background

image on the fabric.

* Lines or color changes in the image can help you find the correct alignment position.

cPlace the paper printed with the positioning image on top of the fabric so that the pattern is aligned, and then affix the paper to the fabric with cellophane tape to prevent the paper from moving.

aCellophane tape

dAfter checking that a pattern is selected,

press .

￿The sewing screen appears.

Note

•Before embroidering, check that the embroidery position sheet is perfectly aligned with the background.

eAlign the embroidering position according to steps b through f of “Using the Built- In Camera to Align the Embroidering Position” on page 206.

fRemove the positioning sheet and press the “Start/Stop” button to begin embroidering.

CAUTION

•Before pressing the “Start/Stop” button to

begin embroidering, remove the positioning sheet taped to the fabric in step c.

222