Manuals / Brother / Household Appliance / Sewing Machine

Brother 882-W02, 882-W01 operation manual 339

Models: 882-W01 882-W02

1 376

Download 376 pages 39.41 Kb

Page 353

ERROR MESSAGES

This message appears when the built-in camera is being used to align the embroidery position, but the embroidery positioning sticker is too near an edge or the pattern extends from the embroidery frame. Change the positioning of the embroidery position sticker, and then try aligning the position again. See page 206 or 302.

This message is displayed when the upper thread is broken or not threaded correctly, and the “Start/Stop” button or the “Reverse/ Reinforcement Stitch” button is pressed.

This message is displayed when the “Presser Foot Lifter” button is pushed while the presser foot lever is raised/ the needle is lowered.

This message is displayed when the “Start/Stop” button is pushed to sew Utility stitches or Character/ Decorative stitches while the foot controller is connected. (This message does not appear when embroidering).

This message is displayed when the “Start/ Stop” button is pushed while the machine is in embroidery edit mode and a pattern is being edited.

This message is displayed when there is no stitch or embroidery pattern selected and the “Start/Stop” button or the “Reverse/Reinforcement Stitch” button is pressed.

This message is displayed when the bobbin thread is running out.

This message is displayed when the memory is full and the stitch or pattern cannot be saved.

This message is displayed when the machine is retrieving a previously saved pattern while in embroidery edit mode.

This message is displayed when, after selecting a

pattern, ,

, or is

pressed and the pattern is about to be deleted.

8

Appendix

339

Image 353

Brother 882-W02, 882-W01 operation manual 339

Contents

Computerized Embroidery and Sewing Machine Trademarks Read Before DOWNLOADING, COPYING, Installing or UsingIntroduction Important Safety Instructions8For repair or adjustment For Users in the UK, EIRE, Malta Cyprus only Important Safety Instructions Label location Checking the Needle Location in the Screen Edge Sewing Outstanding FeaturesPrint and Stitch Combining the Embroidery and Printing Duplicating a PatternSewing Basics What YOU can do with this MachineHOW to USE this Manual Contents Embroidery 181 Xii Right-side/Rear View MachineFront View Presser foot Needle and Presser Foot SectionOperation Buttons Embroidery UnitUsing the Accessory Case Using the Flat Bed AttachmentOpening the Accessory Case Closing the Accessory CaseStoring Bobbin Clips Using the Embroidery Unit Carrying CaseIncluded Accessories 75/11 Part Code SABF6000D OptionsHow to Assemble the Spool Stand Using the Spool StandHow to Remove Getting Ready Turning the Machine ON/OFF Turn the main power switch to O to turn off the machine Turn the main power switch to I to turn on the machineHome Page Screen LCD ScreenUtility Stitch LCD Screen D e U t J k l Key FunctionsPresser foot/Needle USB Connectivity Using a USB Mouse Connecting the Machine to the ComputerChanging Pages Clicking a KeyLCD Screen Sewing settings Using the Machine Setting Mode KeyGeneral settings Embroidery settings Display 3/7 page 3 of 7 of the General settings screen Changing the Pointer Shape When a USB Mouse Is UsedChanging the Screen Saver Image PressSewing settings screen appears IPress a file name to select image and then GPress to select the first imageHSelect the device that is connected Press to return to the original screen Selecting the Initial Screen DisplayEPress to return to the original screen Choosing the Display LanguageChanging the Background Colors of the Embroidery Patterns Press to return to the original screen Select the background color from the 66 settings availableUsing the Sewing Machine Help Key Using the Operation Guide Function Enterpage. Utility Stitch category from the home Press Using the Sewing Guide FunctionRead the instructions Read the explanations and select the appropriate stitch Using the Pattern Explanation FunctionAPress Screen shows information Winding the Bobbin Using the Supplemental Spool PinLower Threading Setposition.the supplemental spool pin in the up Guide slit with built-in cutter Bobbin winder seat Using the Spool Pin HFollowthroughsteps40. g through k on Using the Spool StandPass the thread through the thread guide Untangling Thread from Beneath the Bobbin Winder Seat Press Slide the bobbin cover latch to the right Setting the BobbinCutter Cutter cuts the thread Replace the bobbin cover Pulling Up the Bobbin ThreadPress the Needle Position button to raise the needle Upper ThreadingUpper Threading Look in the upper groove area Needle bar thread guide Using the Twin Needle Mode Press and install the twin needle Changing the Needle on Start sewing KPress to select the twin needle modeIPress Select a stitch pattern. Example When using thread on a cone spool, use the spool holder Using the Spool Net Using Threads that Unwind QuicklyRemoving the Presser Foot Changing the Presser FootAttaching the Presser Foot Raise the presser foot leverMemo Attaching the Walking FootChanging the Needle Press to unlock all keys and buttons Fabric/Thread/Needle Combinations About the NeedleSewing Basics Sewing Install the presser foot Changing the Presser Foot onSewing a Stitch Lower the presser footAdjust the sewing speed with the speed control slide Using the Foot ControllerSewing Curves Sewing Reinforcement StitchesChanging Sewing Direction Sewing Heavyweight FabricsSewing a Seam Allowance of 0.5 cm or Less If the Fabric does not Fit under the Presser FootIf the Fabric does not Feed Sewing Lightweight FabricsSewing Hook-and-Loop Fastener Sewing Stretch Fabrics Setting the Stitch Width Stitch SettingsProper Thread Tension Setting the Stitch LengthSetting the Thread Tension Upper Thread is Too Loose Upper Thread is Too TightSelect a stitch pattern Useful FunctionsAutomatic Reinforcement Stitching Setsewing.the fabric in the start position and start Automatic Thread CuttingUsing the Knee Lifter Pivoting Select a stitch BPress to select the pivot settingCPress to return to the original screen Rotate the fabric, and then press the Start/ Stop buttonLocking the Screen Needle Position Stitch PlacementSew your project Checking the Needle Location in the ScreenUseful Functions Utility Stitches Stitch Selection Screens Selecting Utility StitchesBUse to select the category you want Using the Mirror Image KeySelecting a Stitch Press to go back to the original screen Using the Image KeySaving Settings Saving Your Stitch SettingsSelect a stitch Retrieving Saved SettingsStraight Stitches Sewing the StitchesPressforward.the Start/Stop button to sew Select a stitch Attach presser foot JExample Left/Middle needle position stitches Grasp the bobbin case, and then pull it out Or pressSew while keeping the fabric straight BastingJInsertfoot. needle and attach the straight stitch Gathering Dart SeamASelect and attach presser foot J Selectfoot J.a straight stitch and attach presserGSew on the seam line and remove Basting stitch Flat Fell SeamSpread the fabric out along the finish line Iron the folds in the same direction PintuckZigzag Stitches Overcasting Using a Zigzag StitchAppliqué Using a Zigzag Stitch Cord Guide Bobbin Cover Using a Zigzag Stitch Sewing Curves Using a Zigzag StitchPatchwork for Crazy Quilt Remove the bobbin cover from the machine seeOvercasting Elastic Zigzag StitchesTape Attaching Overcasting Overcasting Using Presser Foot GOvercasting Using Presser Foot J Overcasting Using the Side Cutter Notch in presser foot holder Pin Side cutter is attached Lower the presser foot and start When Sewing Straight Stitches While Using the Side CutterZigzag stitch Left Quilting100 Sewing the Stitches 101Piecing 102Quilting ASelect or and attach presser foot JAppliqué 103Quilting with Satin Stitches 104105 Using Free motion Quilting Foot CFree Motion Quilting BSelect orDRemove55. the presser foot holder see Press to set the machine to free motion sewing mode106 107 HPress to cancel the free motion sewing modeUsing free motion Open Toe Quilting Foot O 108 Echo Quilting Using the Free Motion Echo Quilting Foot EGPressmode. to cancel the free motion sewing 109 ASelect Press to set the machine to free motion sewing mode110 HPress to cancel the free motion sewing modeTurn the skirt or pants wrong side out Blind Hem Stitches111 Attach blind hem foot R GSelect or 112113 AppliquéIf the Needle Catches Too Much of the Hem Fold If the Needle does not Catch the Hem Fold114 Shelltuck StitchesAppliqué Sharp Curves Appliqué CornersTrim along the seam, making sure not to cut the stitches Scallop Stitches115 116 Crazy QuiltingSmocking Stitches Tape or Elastic Attaching Fagoting117 HPull out the straight stitch threadsESelect or 118Sew over the tape or elastic Pull out the straight stitch threads119 HeirloomHemstitching 1 Daisy Stitch Hemstitching 2 Drawn WorkHemstitching 3 Drawn Work 120121 One-step Buttonholes122 123 Lower the presser foot and start sewing 124Sewing Stretch Fabrics 125 Four-step Buttonholes126 Darning 127128 129 Bar TacksGently hold the end of the upper thread and begin sewing 130Bar Tacks on Thick Fabrics 131 Button SewingRaise the presser foot Gently hold the end of the upper thread and start sewingAttaching 4 Hole Buttons 132Attaching a Shank to the Button Pullsewing.the shank lever toward you before133 EyeletBSelect and attach monogramming foot N 134Multi-directional Sewing Straight Stitch and Zigzag Stitch Centered Zipper Zipper Insertion135 Inserting a Side Zipper 136Set the presser foot in the 3 mm approx /8 inch margin 137138 Edge SewingPeel off the transparent sheet of the edge sewing sheet 139BAttachV. the vertical stitch alignment foot EPress 140141 When the Built-In Camera Can Detect the Edge of the Fabric142 When the Fabric Edge Indicator Line Does Not Appear143 Example When a straight stitch is selectedPress 144Character/Decorative Stitches 146 Selecting Stitch Patterns7mm Satin Stitch Patterns Cross Stitch 147Alphabet Characters Cross Stitch/Utility Decorative Stitch Patterns148 Press , or to select a fontDPress and then enter lue FPress again and enter S 149CPress Then enter B EPress Deleting Characters Adjusting the Character Spacing150 151 BPress to adjust character spacingSewing Attractive Finishes Sewing Stitch PatternsBasic Sewing 152APress Select On 16/16 Making Adjustments153 FPress to return to the original screen 154Sew the stitch pattern again 155 Editing Stitch Patterns156 Creating a Vertical Mirror Image Changing the Size157 Actual Stitch Pattern SizeSewing a Pattern Continuously Creating a Horizontal Mirror ImageChanging Thread Density For Satin Stitch Patterns Only 158Press the Start/Stop button to stop Machine, and then press Returning to the Beginning of the Pattern159 Press to display the enlarged image Checking the Image160 Press to return to the original screen 161Before Combining Combining Stitch PatternsCombining Various Stitch Patterns 162163 164 Combining Large and Small Stitch PatternsImage Stitch Patterns Combining Horizontal MirrorCombining Stitch Patterns of Different Length 165BSelect again, then press 3 times 166Press BPress 167CPress again EPress DPressMore Examples 168169 Using the Memory FunctionStitch Data Precautions Trademarks 170171 Saving Stitch Patterns in the Machine’s MemoryChoose a stitch pattern to delete 172If the Memory is Full 173 174 Saving Stitch Patterns to USB Media175 Saving Stitch Patterns in the Computer176 Retrieving Stitch Patterns from the Machine’s MemoryChoose a stitch pattern to retrieve Recalling from USB Media177 178 179 Recalling from the Computer180 Embroidery 182 Before EmbroideringEmbroidery Step by Step 183 Attaching Embroidery Foot W184 Attaching the Embroidery UnitAbout the Embroidery Unit HPress to unlock all keys and buttonsTurn the main power to OFF Turn the main power to on185 Removing the Embroidery UnitCopyright Information Selecting Patterns186 Pattern Selection Screens 187188 Press the key of the pattern you want to embroider 189190 Selecting Alphabet Character PatternsDPress and then enter B 191HPress and then enter ky Selecting Frame Patterns192 Press the key of the frame pattern you want to embroider 193Followpattern.the steps on page 189 to select a Selecting Patterns from Embroidery Cards194 195 Selecting Patterns from USB Media/Computer196 Viewing the Sewing ScreenKey Functions 197198 Preparing the Fabric199 Types of Embroidery Frames Hooping the Fabric in the Embroidery Frame200 Inserting the Fabric 201Return the frame adjustment screw to its initial position Using the Embroidery Sheet202 Remove the embroidery sheet203 Embroidering Small Fabrics or Fabric EdgesEmbroidering Small Fabrics Embroidering Edges or CornersWith the holder’s Attaching the Embroidery Frame204 Removing the Embroidery Frame 205206 Confirming the Pattern PositionAfter selecting the pattern, press Then press 207Following message appears. Press 208209 Checking the Pattern PositionFabric, and press Press Press the Start/Stop button to begin embroideringThat you want to check Previewing the Completed Pattern210 BPress to select the frame used in the preview 211212 Sewing AN Embroidery PatternEmbroidery Needle Plate Cover Sewing Embroidery Patterns213 Press the Start/Stop button to start embroidering 214Sewing Embroidery Patterns Which Use Appliqué 215Press the Start/Stop button 216217 Using iron-on paper Using printable fabricChecking Only the Embroidery Pattern Selecting a Pattern218 219 Using USB Media220 Using a USB CablePrint the background image 221Cut the paper printed with the center 222Image on the fabric After checking that a pattern is selected Press223 If the Bobbin Runs Out of Thread224 If the Thread Breaks During Sewing225 Resuming Embroidery After Turning Off the PowerRestarting from the Beginning Continue embroidering 226Attach the embroidery frame and press Adjusting Thread Tension Making Embroidery Adjustments227 Correct Thread TensionCorrect Tension 228229 Using the Automatic Thread Cutting FunctionBobbin Thread is Too Loose Bobbin Thread is Too TightPress BPress to turn off the thread trimming function 230Selecting the Length of Jump Stitch Not to Trim Changing the Thread Color Display Adjusting the Embroidery Speed231 To change the maximum embroidery speed232 DWhen the thread number #123 isChanging the Embroidery Frame Display 233 234 Revising the PatternChanging the Pattern Position 235 Aligning the Pattern and the NeedlePress EUse 236On the fabric, and begin embroidering the pattern APress BSelectsize. the direction in which to changeAPress Select the angle of rotation for the pattern Rotating the Pattern237 238 Creating a Horizontal Mirror ImageCPress to return to the pattern selection screen 239APress Change the density APress so that it appears as Changing the Colors of Alphabet Character Patterns240 Select the character patterns for ABC Embroidering Linked Characters241 As in step a, select the character patterns for DEF Press 242MUse 243Types of Embroidery Data that can be Used Embroidery Data Precautions244 Tajima .dst Embroidery Data 245246 Saving Embroidery Patterns in the Machine’s MemorySelect the pattern you want to delete 247248 249 Saving Embroidery Patterns to USB Media250 Saving Embroidery Patterns in the Computer251 Retrieving Patterns from the Machine’s MemoryCPress 252Pressretrieve.the key of the pattern you want to 253Pressrecall.the key of the pattern you want to 254FPress 255256 Using a Frame Pattern to Make an AppliquéEmbroidery Applications 257 258 BSelect section to be embroidered Sewing Split Embroidery Patterns259 If necessary, edit the pattern 260Embroidery Edit 262 Explanation of Functions263 Selecting Patterns to EditProceed to Editing Patterns on page 267 to edit the pattern 264Select the font, then enter the characters. Example a B C D 265Select the layout. Example CPress to change the layout of the patternAfter you finish your selections, press 266267 Editing PatternsF g L k 268269 Moving the Pattern270 Changing the Size of the Pattern271 Changing the Configuration Alphabet Character PatternsDeleting the Pattern Press the key of the layout you want to embroider Changing Alphabet Character Spacing272 BUse to change the spacing Reducing Character Spacing273 Separating Combined Character Patterns Use to select where the pattern is274 APress BPressSpacing 275Use to select a pattern, Then use BIn the sewing screen, press Press 276277 Pattern editing screen, press Changing the Thread Color278 CPress to choose a new color from the color palette Creating a Custom Thread Table279 Add a color on the custom thread table 280EPress 281GPress to return to the original screen 282Color from the custom thread table 283Sewing Repeated Patterns Designing Repeated Patterns284 285 Adjust the spacing of the repeated patternBUse and to select the cut line 286Repeating One Element of a Repeated Pattern Color Sorting Repeated Patterns 287288 Assigning Thread Marks 289APress BPress CPress Sewn290 After EditingEditing Combined Patterns Combining Patterns291 Pattern BUse to view 2/7, then select PressFSelect and enter Spring 292Press Press to enter the alphabet characters 293 KWhen all editing is finished, pressSelecting combined embroidery pat- terns IPress to change the layout Characters. Press294 Sewing Combined PatternsColor order on the right side of the display BEmbroiderVarious Embroidering Functions Press , and then display 7/7 of the settings screenBasting Embroidery 295Creating an Appliqué Piece Screen DPress EPress to select the basting setting296 Creating an Appliqué PieceScreen EPress 297Select the pattern, and edit it if necessary 298 FPress to select the appliqué settingApplique Material 299300 Using a Frame Pattern for the Out- lineHPress 301After selecting the pattern, press Then press 302Press 303Fabric and press 304305 Using the Memory Function306 Using iron-on paper Using printable fabric307 Selecting a Pattern308 Using USB Media309 Using a USB CablePrint the background image 310Positioned aligned with the background image on the fabric 311312 MY Custom Stitch 314 Designing a StitchDraw the stitch design on the grid sheet part code SA507 Decide the spacing of the stitchExamples of Custom Stitches 315316 Entering Stitch DataPress to add the point indicated by 317FUse To move 318Moving a Point 319Moving Part or All of the Design APress or to move to the point that you want to moveCPress or to move the section 320Inserting New Points 321 322 Using Stored Custom StitchesStoring Custom Stitches in Your List Select the stitch pattern Retrieving Stored Stitches323 324 335 329Cleaning the LCD Screen Care and MaintenanceCleaning the Machine Casing Cleaning the Race327 Cleaning the Cutter in the Bobbin Case Area328 About the Maintenance MessageTurn the main power to OFF, then turn it back to on Adjusting the ScreenTouch Panel is Malfunctioning 329330 Troubleshooting331 332 Chart333 334 335 Error Messages336 337 This message is displayed 338339 340 341 342 Alarm Sounds343 Specifications344 Upgrade Procedure Using USB MediaUpgrading Your MACHINE’S Software Copy the upgrade file to Removable Disk Upgrade Procedure Using Computer345 Remove the USB media, and turn the machine off and on againUnplug the USB cable, and turn the machine off and on again When the message disappears, press346 347 Stitch Setting Chart348 Stippling 349350 351 352 353 354 355 356 IndexMY Custom Stitch 357358 SettingsPage Page